Mackie C300z 12" 2-way Compact Passive SR Loudspeaker

Vendor: Mackie
Description Mackie C300z 12" 2-way Compact Passive SR Loudspeaker The Mackie C300Z is a mid-priced 2-way speaker that is designed with a 12" woofer and a 1.75" compression driver enclosed in a wide-dispersion constant directivity...
$499.99 $599.00
Title

Mackie C300z 12" 2-way Compact Passive SR Loudspeaker

The Mackie C300Z is a mid-priced 2-way speaker that is designed with a 12" woofer and a 1.75" compression driver enclosed in a wide-dispersion constant directivity horn housing, it comes with a 300 Watt average power handling capacity.

The asymmetrical design and internal damping of the Mackie C300Z is designed to contribute toward a natural sound reproduction free of phase anomalies, and the rugged enclosure is possible to be pole-mounted, flown, or used as a floor monitor. C series speakers are tuned exclusively by the renowned EAW design team, and are offering the design concepts applied to elite loudspeaker systems at a fraction of the cost.

  • Portable Passive loudspeaker with 1.75" HF compression driver and 12" LF transducer
  • 750W peak power handling
  • HF compression driver mounted on multi-celled aperture, with constant directivity horn for wide 90° x 45° dispersion angle
  • Accurate reproduction of upper mid-range and high frequencies, tuned Low Impedance Compensated Crossover(LICC) for matching driver beamwidth patterns
  • Asymmetrical monocoque design with no parallel surfaces, causes reflection of mid and high frequency resonances at angles into internal damping materials, minimizes phase anomilies and other signal distortion
  • Equally viable as floor monitor or mounted/flown PA speaker with natural frequency response and dispersion, free from feedback-causing transient spikes
  • Dynamic protection for compression driver, 2nd order high-pass filter for over-excursion protection
  • Inputs and thruputs for parallel connection of up to 2 sets of speakers from single amp channel or powered mixer
  • Rugged impact-resistant enclosure with sturdy side handles, pole-mount, and integrated rigging points for "flying" the speakers
PA Speaker
Configuration Passive 2-Way
Total Power Capacity 300 W RMS
500 W Program
750 W Peak
System Impedance 8 Ohms
Drivers
HF Driver 1 x 1.75" / 44 mm Horn-Loaded Titanium Tweeter
LF Driver 1 x 12" / 305 mm Woofer
LF Voice Coil 3" / 76 mm
Performance
Frequency Response 55 Hz to 18 kHz -3 dB
Maximum SPL 123 dB
Speaker Sensitivity LF:
98 dB
HF:
106 dB
Connectivity
Audio I/O 2 x speakON NL4
2 x 1/4" TS
Signal Processing
Crossover 1.8 kHz, 24 dB/Octave
Physical
Construction Material Metal Grille, Polypropylene
Dimensions 26 x 15.4 x 14.8" / 660 x 390 x 376 mm
Weight 43 lb / 19.5 kg