LAB GRUPPEN C 48:4_US1 4800W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control (C 48:4_US1)

Vendor: Lab Gruppen
LAB GRUPPEN C 48:4_US1 4800W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control Introducing the C 48:4—an audio powerhouse and the third-largest amplifier within the C Series family, harnessing an incredible 4...
$3,899.00
Title

LAB GRUPPEN C 48:4_US1 4800W 4-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control

Introducing the C 48:4—an audio powerhouse and the third-largest amplifier within the C Series family, harnessing an incredible 4 × 1200 W at 4 ohms. This compact 2U chassis houses exceptional power alongside a robust suite of protection and monitoring features. Adaptability defines the C Series amplifiers. Featuring individually configurable Voltage Peak Limiters (VPL™) on each channel, it tailors the output precisely for any loudspeaker load. Whether it's a single booming subwoofer or an array of smaller 100/70 V speakers, the VPL, paired with adjustable input gain, ensures unmatched headroom, adapting seamlessly to input levels and output impedances. And here's the kicker—every C Series unit comes fully equipped for the NomadLink® network straight out of the box. With NomadLink, access vital amplifier parameters effortlessly via DeviceControl software. Take command of channel mutes and power on/off remotely through network control. Elevate your audio experience with the C 48:4—where power, precision, and adaptability converge to redefine excellence in sound.

Features

  • 4,800 Watt, 4-channel amplifier with up to 1,200 Watts output per channel and NomadLink network for monitoring and control
  • Selectable gain plus scalable Voltage Peak Limiter (VPL) and bridge-mode operation allow custom configuration for any application
  • 4 x 600 Watts into 2 Ohms, 4 x 1,200 Watts into 4 Ohms, 4 x 1,000 Watts into 8 Ohms, 4 x 625 Watts into 16 Ohms, 4 x 1,100 Watts into Hi-Z 70 V, 4 x 900 Watts into Hi-Z 100 V
  • Proven and reliable Class-TD output stage delivers Class-A/B audio quality with Class-D efficiency
  • Regulated Switch Mode Power Supply (R.SMPS) ensures constant power output at all times
  • Intuitive DeviceControl software monitors and controls key functions via the NomadLink network
  • Comprehensive protection scheme including current, voltage, DC, temperature, short circuit and open load warnings
  • Efficient Intercooler copper cooling system dissipates more heat for extended peak output
  • 4 x balanced analog audio inputs on 3-pin Phoenix connectors
  • 4 x barrier strip 2-pole screw terminal output connectors
  • Removable dust filter grille for increased air circulation
  • Compact and durable 2U rackmount chassis saves space in install applications
General
Number of amplifier channels

4

Peak total output all channels driven

4800 W

Peak output voltage per channel

141 V

Max output current per channel

17.5 Arms

Max output power (all channels driven)
16 ohms

625 W

8 ohms

1000 W

4 ohms

1200 W

2 ohms

600 W

Hi-Z per ch. (all ch.’s driven): 70 Vrms / 100 V peak

1100 W

Max output power bridged
16 ohms

2000 W

8 ohms

2400 W

4 ohms

1200 W

2 ohms

Not recommended 1

Bridged per ch.: 140 Vrms / 200 V peak

1800 W

Performance
THD 20 Hz - 20 kHz at 1 W

<0.1%

THD at 1 kHz and 1 dB below clipping

<0.05%

Signal to Noise Ratio

>112 dBA

Channel separation (Crosstalk) at 1 kHz

>70 dB

Frequency response (1 W into 8 ohms) + 0 / -3 dB

6.8 Hz - 34 kHz

Input impedance

20 kOhm

Common Mode Rejection (CMR)

>50 dB, 20 Hz - 20 kHz

Output impedance @ 100 Hz

30 mOhm

Gain, Sensitivity and Limiters
VPL, selectable per ch 2

141, 118, 100, 85, 71, 59, 50, 42 V

VPL, when bridged 2 3

282, 236, 200, 170, 142, 118, 100, 84 V

Voltage Peak Limiter mode (per ch.)

Hard / Soft

Amplifier gain selectable (all channels) – rear-panel switches 3

23, 26, 29, 32, 35, 38, 41, 44 dB

Default gain

35 dB

Level adjustment (per channel)

Front-panel potentiometer, 21 position detented from -inf to

Connectors and Buttons
Input connectors (per ch.)

3-pin Phoenix, electronically balanced

Output connectors (per ch.)

Barrier strip 2-pole screw terminals

Output bridge mode

A+B and/or C+D, inputs A and C are input source

NomadLink network

On board, 2 x RJ45 connectors IN and OUT

Intelligent fans (on/off)

Yes, depending on presence of output signal

Power

Individual switches on front panel

Cooling

Two fans, front-rear airflow, temperature controlled speed

Front-panel user interface
Common

NomadLink Network; Power Average Limiter (PAL)5; Power on

Per channel

Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute

Power
Operating voltage, 230 V / 115 V nominal

130-265 V / 65 -135 V 4

Minimum power-up voltage, 230 V / 115 V

171 V / 85 V

Power Average Limiter (PAL) 5

Yes

Power Factor Correction (PFC)

No

Soft-start / Inrush Current Draw

Yes / max. 5 A

Mains connector

230 V CE: 16 A, CEE7; 115 V ETL: 20 A / NEMA 5-20P; C16:4: 15A/NEMA 5-15P

Dimensions
Dimensions

W: 483 mm (19”), H: 88 mm (2 U), D: 343 mm (13.5”)

Weight
Weight

12 kg (26.4 lbs)

Finish
Finish

Black painted steel chassis with gray painted steel front