FREE CHURCH DESIGNS
Call us 1-877-477-6543 or email us at sales@muzeekworld.com
USD
EUR
AUD
GBP
JPY
Audio Technica PRO35 Cardioid Condenser Microphone
Vendor: Audio Technica
Description Audio Technica PRO35 Cardioid Condenser Microphone The Audio Technica PRO35 is a Cardioid Condenser Microphone which is professionally designed for percussion, brass, sax, and toms, it also excels in high-SPL applications and is ideal for...
Audio Technica PRO35 Cardioid Condenser Microphone
The Audio Technica PRO35 is a Cardioid Condenser Microphone which is professionally designed for percussion, brass, sax, and toms, it also excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response is capable of capturing the subtle nuances of the performance. It also has the included UniMount® clip which permits the accurate positioning and able to provide shock resistance, and protecting the element at the same time. The microphone’s cardioid polar pattern is reducing the pickup of sounds from the rear and sides, that improves the isolation of the desired sound source.
FEATURES
- UniMount® clip permits accurate positioning, provides shock resistance and protects element
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Extended frequency response captures subtle nuances of the performance
- 6' (1.8 m) cable permanently attached to microphone
POLAR PATTERN
FREQUENCY RESPONSE
| ELEMENT | Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN | Cardioid |
| FREQUENCY RESPONSE | 50-15,000 Hz |
| LOW FREQUENCY ROLL-OFF | 80 Hz, 18 dB/octave |
| OPEN CIRCUIT SENSITIVITY | -45 dB (5.6 mV) re 1V at 1 Pa |
| IMPEDANCE | 250 ohms |
| MAXIMUM INPUT SOUND LEVEL | 145 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) | 115 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO | 64 dB, 1 kHz at 1 Pa |
| PHANTOM POWER REQUIREMENTS | 11-52V DC, 2 mA typical |
| SWITCH | Flat, roll-off |
| WEIGHT (MICROPHONE) | 0.3 oz (8 g) |
| WEIGHT (POWER MODULE) | 2.9 oz (81 g) |
| DIMENSIONS (MICROPHONE) | 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter |
| DIMENSIONS (POWER MODULE) | 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter |
| OUTPUT CONNECTOR (POWER MODULE) | Integral 3-pin XLRM-type |
| CABLE | 6.0' (1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector |
| ACCESSORIES FURNISHED | AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch |
| AUDIO-TECHNICA CASE STYLE | M12 |
