Appsys Digital Snake System

Appsys Digital Snake System

A Little About Appsys

Digital snake, value for money: less than $17/channel!*

Do you still believe digital multicores are expense? Or proprietary? Think again! Use our ADAT Multicore Extenders to connect to any number of ADAT compatible equipment with standard Cat5 network cabling. It reaches longer than fiber (330ft/100m), weighs less than analog cable (only one Cat5 for 32 channels), is cheaper than MADI and more compatible than propriety systems. The newest generation comes with additional features (like MIDI transmission) which have been often requested by our loyal customers.

 

 

If you'd like to get the lowest priced quote on this item, send us an email at sales@muzeekworld.com! You can also fill out the contact form located in the sidebar.

 

ADX-32B: 4X ADAT AND 1X MIDI OVER CAT5 - UP TO 330FT./100M

With a total capacity of 32 audio channels and MIDI connection over a single Cat5 cable, the ADX-32B is the right choice for building an inexpensive 24/8 multicore. The transmission direction can be set individually for each ADAT channels, and with an extension module, the ADX-32B can be upgraded later to an ADX-64B-PRO if you need more channels. On request, the ADX-32B is also available with a BNC wordclock output which simplifies wordclock distribution with your devices (e.g. preamps on stage).

 

ADX-64B-PRO: 8X ADAT, UP TO 2X MIDI AND WORDCLOCK OVER CAT5 - UP TO 330FT./100M

Our top model combines two ADX-32B in a single case. With its total capacity of 64 channels, one MIDI channel (two optional), wordclock transmission, a newly introduced wordclock-from-ADAT feature which eliminates the need of a BNC master clock, the redundant power supply (optional), the ADX-64B is ideally suited for larger setups. This model uses two Cat5 cables for transmission.

 

MONITORING AND RECORDING SPLITS INCLUDED

All ADAT input are also looped through to the output jack alongside, often eliminating the need for additional signal splitters for monitoring and recording. If you still need more, you can daisy-chain multiple ADX units together and use them as extensible audio distribution system, e. g. for streaming audio data within buildings to multiple locations.


MIX & MATCH

Both device types are compatible and can be combined: For example, you can use an ADX-64B-PRO at your mix console, and two ADX-32B on stage (one located on the right and one on the left side). A simple ADAT splitter can be built by looping the Cat5 cables through on an ADX-64B-PRO. If you need a longer reach than 330ft/100m, an ADX-64B-PRO can also be used as Cat5 signal repeater by simply connecting ADAT In/Outs from the two submodules together. Imagine what else can be done...


DMX TRANSMISSION (OPTION)

On request, the ADX can be modified to include DMX transmission, eliminating the need for a seperate DMX cable run. The devices will be delivered with a female DMX receptable on one device, and a male DMX plug on the other. Note: The DMX option reduces the number of available ADAT connections by 1. This means that the ADX-32B still has 3*ADAT (24 channels) available, while 7*ADAT (56 channels) remain in the ADX-64B-PRO.

For technical and availability info call (877) 477 6432 or Email us