|
We
carry a wide rang of loudspeakers, from bose, EAW, Mackie to Yorkville
, Electrovoice, JBL, QSC, Turbosound and many more. With such a
lare line let us help you find the bast speaker for your needs.
We know every speaker we sell, some we like and some we don't -find
out today
We
do 70 volt distribution speaker installs , repairs, and support
877-477-6432
CHOOSE
YOUR PA SPEAKERS
HOT SPOT Q&A's
1.)
Q --Can my amplifier drive the 16 ohm HOT
SPOT speaker safely? According to the specs, the amplifier is
only rated for 2, 4, and 8 ohms.
1.)
A--Yes. 16 ohm loads are
LESS demanding on amplifiers.
2.)
Q --I just purchased my first HOT SPOT,
and I think it may be broken. My HOT SPOT does not have any low
end response. I sounds very "middy". Is this a common
problem?
2.)
A--The HOT SPOT was designed
to be "middy" (midrange); we call this Controlled Bandwidth.
The purpose of the HOT SPOT is for near-field vocal monitoring.
The Controlled Bandwidth eliminates the low end in the HOT SPOT
so we can target the vocal frequency range. If you are looking
for more low end in a compact monitor, we do have a monitor with
an 8 inch woofer called the CORE 8W.
3.)
Q-- Why aren't the SA-1's (Stand Adaptors)
included with the unit I just purchased.
3.)
A--Galaxy Audio does not
send a stand adaptor with every personal monitor because most
microphone stands like the Atlas and SHURE mic stands do not need
the adaptor to fit securely on the stand. Also, it is not needed
for mounting on top of pianos or organs. And lastly, it would
raise the price of the units.

| HOT
SPOT |

HOT
SPOT SERIES
Controlled Bandwidth (150 Hz-18 kHz +/- 6 dB)
- Two
S5N-8 NEOLITE drivers ferrofluid cooled
200 watt continuous power rating
98 dB sensitivity (1 watt at 1 meter)
123 dB maximum SPL (200 watts at .5 meter)
28 SPLOWT
16 ohm impedance
Two ¼" jacks enable HOT SPOTs to be "daisy
chained"
Rugged black ABS cabinet with cloth covered ABS grille
Mic stand socket
Volume control (HSVC only): Wide open to -18dB in 3dB
steps
6.75" x 10.94" x 6" (171 mm x 278 mm x
152 mm)
4.5 lbs. (2.04 kg)
|
|
|
CHAMELEON CB |

- CHAMELEON
SERIES
Rugged
ABS cabinet
Two S5N-8 NEOLITE drivers ferrofluid cooled
200 watt continuous power rating
98 dB sensitivity (1 watt at 1 meter)
123 dB maximum SPL (200 watts at .5 meter)
28 SPLOWT
16 ohm impedance
Controlled Bandwidth (150 Hz-18 kHz +/- 6 dB)
- Cloth
covered Noryl grille
Spring terminal connectors
Mic stand socket
6.75" x 10.94" x 6" (171 mm x 278 mm x
152 mm)
4.5 lbs. (2.04 kg)
- Options:
Yoke Bracket (stand mount or wall mount)
Water resistant cone treatment
70 volt/100 watt autoformer for use in distributed systems
|
|
|
CORE 8W |
Core
8W Floor Monitor
- Bass
reflex wedge cabinet
- Bullet
tweeter
Woofer: 8" with 38 oz. magnet, 2" voice coil
diameter
Nominal impedance: 8 ohms
Power handling capacity: 150 watts RMS / 375 PGM
Crossover point: 2kHz
Sensitivity: 96 dB @ 1 watt/1 meter
Frequency response: 65 Hz-18 kHz
Input connections: 4 pin twist lock (SPEAK-ON) paralleled
with two ¼ inch inputs
Textured CORECOAT finish
Cloth covered embossed Noryl grille
Avalible in black and white
Built-In speaker stand mount on black wedge only
Sits on floor at any of three angles
16" x 9" x 11.5" (406 mm x 229 mm x 292
mm)
|
|
| CHAMELEON
HF |
Chameleon
HF
- High
Fidelity (50 Hz to 20 kHz ± 6 dB)
- 5
inch woofer
1 inch ferrofluid cooled soft dome tweeter
Bass reflex cabinet
8 ohm impedance
40 watts RMS, 60 watts peak power rating
Sensitivity 92 dB at 1 watt/1 meter
Splowt: 13.1
Cloth covered embossed Noryl grille
Rugged ABS cabinet
Thermal and dynamic tweeter protection
Spring terminal connectors
7" x 11" x 5.25" (178 mm x 279 mm x 133
mm)
6 lbs. (2.8 kg); w/option 70/100, 8.4 LB. (3.8 kg)
Options:
Yoke Bracket (stand mount or wall mount)
Water resistant cone treatment
70 volt/100 watt autoformer for use in distributed systems
White finish (no additional charge)
|
|
| CORE
PA5X140 |

- Class
H amplifier
- SmartALIC
gain management
100 watts @ 8 ohms (typically 146 watts @ 4 ohms)
Frequency response: 200 Hz-20 kHz
Total Harmonic Distortion: < 0.06 @ 8 ohms, < 0.1
@ 4 ohms
EQ: Three band, center-detent controls
Input connections (with individual volume controls):
One balanced ¼"
One balanced XLR (with +24 VDC phantom power)
Output connections:
One ¼-inch speaker level
One (post-EQ, post-level) RCA line out
Indicator LEDs: Power, Compressor-Limiter
One NEOLITE 5" driver ferrofluid cooled
Sensitivity: 98 dB @ 1 watt/1 meter
SPLOWT: 9.12
Fire retardant styrene with cast aluminum grille
Built-In mic stand mount
UL listed
7" x 11" x 5.25" (177 mm x 279 mm x 133
mm)
10.7 lbs. (4.85kg)
|
|
| MICRO
SPOT |

- Controlled
bandwidth (150 Hz to 15 kHz ± 6 dB)
- One
S5N-8 NEOLITE driver ferrofluid cooled
100 watts continuous power rating
Sensitivity 92 dB at 1 watt/1 meter
Splowt: 43
16 ohm impedance
Rugged high impact ABS cabinet
Two ¼-inch jacks wired in parallel
Cloth covered ABS grille
Yoke Bracket stand mount included
- 7"
x 6" x 5.125" (178 mm x 152 mm x 130 mm)
2.7 lbs. (1.23 kg)
Options:
Wall plate
- Water
resistant cone treatment
70 volt/100 watt autoformer for use in distributed systems
White finish (no additional charge)
|
|
| GALACTIC
PACKAGE |

- The
Galactic Monitor Package
146
Watts
- Built-in
Compressor / Limiter
Easy Transportation
Package Weighs Only 27 lbs.
Complete With Cables and Stand Adaptors
Includes:
- 2
HOT SPOT VC
1 POWERED HOTSPOT PA5X140
3 Stand Adaptors (SA-1)
2 25 ft. 16 Gauge Speaker Cables W/ 90º ¼”
Plugs and
- Cable
Locks (SC-2)
1 TRANSPORT (Heavy Duty Water Resistant
Nylon Bag, With Removable Inner Dividers, Shoulder Strap,
handle and wheels
|
|
HOT AUDIO & VIDEO DEALS EVERY DAY
|