PSR 230

Professional Sound reinforcement 1600W

• · 1600W 137dB SPL
  · 2-way bass-reflex system with double 380 mm woofer and 51 mm high frequency unit
• · Enclosure in 18 mm birch plywood with internal reinforcement and scratch-resistant finish designed to resist the rigours of touring applications
• · Trapezoidal profile to reduce internal reflection of soundwaves and facilitate the construction of speaker arrays
• · Custom 380 mm woofer with 100 mm coil and aluminium windings for clean, punchy bass response. High efficiency and power handling thanks to the use of a heavy duty magnet structure and an efficient voice coil cooling system
• · B&C titanium compression driver with 75 mm voice coil and 51 mm exit offers optimum extension at high frequencies and very low distortion right down to the mid-range frequencies
• · Aluminium 60° x 40° dispersion horn
• · Connection panel with 2 Neutrik Speakon NL-4 connectors and links to facilitate the connection of several speakers in parallel. This is the ideal unit for requirements of high sound pressure and excellent extension at low frequencies. Combines extended and smooth frequency response with a mid-range that is powerful and never oppressive, ensuring excellent speech intelligibility
• · Ideal for theatres, auditoriums, live music club venues, Band PA’s and general touring applications
• · 4 M10 anchoring points for suspended installation
• · Excellent power handling: 1600W/4 Ohm with amplifier recommended in Full-Range mode and 1600W/4 Ohm + 160W/8 Ohm for Bi-Amp use
• · Dual-mode passive filter with facility for Full Range or Bi-Amp operation with external processing of the signal. Easy repositioning of a connector inside the speaker enclosure, prevents accidental switching mistakes which can occur on systems with external switches.
• · Inspection window to view the configuration of the passive filter thereby avoiding problems arising from possible incorrect connections

PSR 215

Professional Sound Reinforcement 800W

• · 800W 131dB
• · 2-way bass-reflex system with 380 mm woofer and 51 mm high frequency unit
• · Enclosure in 18 mm birch plywood with internal structural reinforcement and scratch-resistant finish designed to resist the rigours of touring applications
• · Trapezoidal profile to reduce internal reflection of soundwaves and facilitate the construction of speaker arrays
• · Custom 380 mm woofer with 100 mm coil and aluminium windings for clean, punchy bass response. High efficiency and power handling thanks to the use of a heavy duty magnet structure and an efficient voice coil cooling system
• · B&C titanium compression driver with 75 mm voice coil and 51 mm exit offers optimum extension at high frequencies and very low distortion right down to the mid-range frequencies
• · Aluminium 60° x 40° dispersion horn
• · Connection panel with 2 Neutrik Speakon NL-4 connectors and links to facilitate the connection of several speakers in parallel
• · Combines extended and smooth frequency response with a mid-range that is powerful and never oppressive, ensuring excellent speech intelligibility
• · Ideal for fixed installations and theatres, auditoriums, club venues, band PAs
• · 4 M10 anchoring points for suspended installation and insert for floor stand
• · Excellent power handling: 800W/8 Ohm with amplifier recommended in Full-Range mode and 800W/8 Ohm + 160W/8 Ohm for Bi-Amp use
• · Dual-mode passive filter with facility for Full Range or Bi-Amp operation with external processing of the signal. Easy repositioning of a connector inside the speaker enclosure, prevents accidental switching mistakes which can occur on systems with external switches.
• · Inspection window to view the configuration of the passive filter thereby avoiding problems arising from possible incorrect connections

• · 600W 129dB
• · 2-way bass-reflex system with 320 mm woofer and 36 mm high frequency unit
• · Enclosure in 18 mm birch plywood with internal structural reinforcement and scratch-resistant finish designed to resist the rigours of touring applications
• · Trapezoidal profile to reduce internal reflection of soundwaves and facilitate the construction of speaker arrays
• · Custom 320 mm woofer with 75 mm coil and aluminium windings for clean, punchy bass response. High efficiency and power handling thanks to the use of a heavy duty magnet structure and an efficient voice coil cooling system
• · B&C titanium compression driver with 65 mm voice coil and 36 mm exit offering optimum extension at high frequencies
• · Aluminium 90° x 60° dispersion horn
• · Connection panel with 2 Neutrik Speakon NL-4 connectors and links to facilitate the connection of several speakers in parallel
• · Combines extended and smooth frequency response with a mid-range that is powerful and never oppressive, ensuring excellent speech intelligibility
• · Ideal for fixed installations and theatres, auditoriums, and medium-small club venues
• · 4 M10 anchoring points for suspended installation and insert for floor stand
• · Excellent power handling: 600W/8 Ohm with amplifier recommended in Full-Range mode and 600W/8 Ohm + 160W/8 Ohm for Bi-Amp use
• · Dual-mode passive filter with facility for Full Range or Bi-Amp operation with external processing of the signal. Easy repositioning of a connector inside the speaker enclosure, prevents accidental switching mistakes which can occur on systems with external switches
• · Inspection window to view the configuration of the passive filter thereby avoiding problems arising from possible incorrect connections
  

PSR 212M

Professional Sound Reinforcement Stage Monitor 600W

• · 600W 129.5dB
• · 2-way coaxial bass-reflex stage monitor with 320 mm woofer
• · and 36 mm high frequency unit
• · Enclosure in 18 mm birch plywood with internal reinforcements and scratch-resistant finish designed to resist the rigours of touring applications
• · Elegant low-profile cabinet designed to reduce internal soundwave reflections and simplify positioning on the stage
• · Custom 320 mm woofer with 75 mm coil and aluminium windings for clean, punchy bass response. High efficiency and power handling thanks to the use of a heavy duty magnet structure and an efficient voice coil cooling system
• · B&C titanium compression driver with 65 mm voice coil and 36 mm exit offering optimum extension at high frequencies
• · Aluminium horn mounted coaxially to the woofer with 80°x 80° dispersion pattern
• · Connection panel with 2 Neutrik Speakon NL-4 connectors and links to facilitate the connection of several speakers in parallel
• · Specifically designed frequency response for nearfield use as a stage monitor. Combines a generous high-end extension with exceptional body in the principal voice frequencies
• · Excellent power handling: 600W/8 Ohm with amplifier recommended in Full-Range mode and 600W/8 Ohm + 160W/8 Ohm for Bi-Amp use
• · Dual-mode passive filter with facility for Full Range or Bi-Amp operation with external processing of the signal. Easy repositioning of a connector inside the speaker enclosure, prevents accidental switching mistakes which can occur on systems with external switches.
• · Inspection window to view the configuration of the passive filter thereby avoiding problems arising from possible incorrect connections
• · Exceptionally coherent sound diffusion over the entire dispersion angle without the lobing phenomena often associated with conventional 2-way enclosures

PSR 118S

Professional Sound Reinforcement Subwoofer 1600W

• · 1600W 135dB
• · Vented bandpass passive subwoofer with 460 mm woofer
• · Enclosure in 18 mm birch plywood with internal structural reinforcement and scratch-resistant finish designed to resist the rigours of touring applications
• · High SPL 135dB thanks to special loading that serves to increase efficiency with significant reduction of distortion at high volumes
• · Very generous low frequency response (35Hz @ -6dB)
• · Reduced size in relation to acoustic power output provided
• · Custom 460 mm woofer with 100 mm high linear excursion coil. High efficiency and power handling thanks to the use of a heavy duty magnet structure and an efficient voice coil cooling system
• · Connection panel with 2 Neutrik Speakon NL-4 connectors and links to facilitate the connection of several speakers in parallel
• · Exceptional power handling: 1600W/4Ohm recommended amplifier
• · Designed to strengthen and extend the basic range of the PSR line in high SPL applications such as theatres, live music venues, band PA equipment, and touring
• · 4 M10 anchoring points for suspended installation
• · External electronic crossover required

FBTMaxX 6A

Processed Active Monitor 700+200W

• · Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• · Custom horn, handled and stand adapter built into the structure
• · It can be used in all audio-professional amplification systems
• · Profile for use as a stage monitor
• · Four anchoring points (M10) for wall and ceiling installation
• · Full access to controls in all conditions of use
• · 2-way bi-amplification system:
• woofer with power stage of 700W rms with PWM “Pulse Width Modulation” technology
• driver/horn with power stage of 200W rms in class G
• · 380 mm custom B&C speaker with 75 mm coil with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• · Compression driver with 65 mm coil and 36 mm shaft
• · ADAP® (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• · Active electronic filter 24 dB/oct
• · Control panel highly professional with XLR/Jack Neutrik™, input XLR Neutrik™ Link, Gain plus 3-band equalizer (High- Mid-Low), Volume

• · Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
• · Custom horn, handled and stand adapter built into the structure
• · It can be used in all audio-professional amplification systems
• · Profile for use as a stage monitor
• · Four anchoring points (M10) for wall and ceiling installation
• · Full access to controls in all conditions of use
• · 2-way bi-amplification system:
• woofer with power stage of 400W rms with PWM “Pulse Width Modulation” technology
• driver/horn with power stage of 100W rms in class G ultra-light and ultra powerful.
• · 15” custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
• · Compression driver with 36 mm coil and 25 mm shaft
• · ADAP (r) (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• · Active electronic filter 24 dB/oct
• · Control panel highly professional with XLR/Jack Neutrik(r) input XLR Neutrik(r) Link Gain 3-band equalizer (High-Mid-Low) Volume

Processed Active Monitor 300+100W

• · Extremely light and sturdy enclosure made of polypropylene with gas injection moulding
• · Custom horn, handled and stand adapter built into the structure
• · It can be used in all audio-professional amplification systems
• · Asymmetric profile for use as a stage monitor
• · Four anchoring points (M10) for wall and ceiling installation
• · Provided with adapters to stack the enclosures
• · Full access to controls in all conditions of use
• · 2-way bi-amplification system:
• woofer with power stage of 300W rms with PWM “Pulse Width Modulation” technology,
• driver/horn with power stage of 100W rms in class AB
• · 320 mm custom B&C speaker with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• · 1” compression driver
• · ADAP ® (Advanced Dynamic Active Protection) processor for total transducer protection and optimizing acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• · Active electronic filter (24 dB/oct.)
• · Highly professional control panel with XLR/Jack Neutrik TM, input – XLR Neutrik TM, Link - Gain plus Mic/Line selector, 3-band equalizer (High-Mid-Low), Volum

• · Extremely light and sturdy enclosure made of polypropylene with gas injection moulding.
• · Custom horn, handled and stand adapter built into the structure
• · It can be used in all audio-professional amplification systems
• · Profile for use as a stage monitor
• · Four anchoring points (M10) for wall and ceiling installation
• · Full access to controls in all conditions of use
• · 2-way bi-amplification system:
• woofer with power stage of 200W rms with AB class
• driver/horn with power stage of 50W rms AB class
• · 10” custom B&C woofer with neodymium magnet ultra-light and ultra-powerful. Die-cast aluminium basket
• · 1” Compression driver
• · ADAP (r) (Advanced Dynamic Active Protection) processor for total transducer protection and optimized acoustic response. It guarantees total reliability even under the harshest conditions (prolonged Larsen effect)
• · Active electronic filter 24 dB/oct
• · Control panel highly professional with XLR/Jack Neutrik(r) input, XLR Neutrik(r) Link, Gain, 3-band equalizer (High-Mid-Low), Volume

FBTMaxX 10SA

Processed Active Sub-Woofer 900W

• · Enclosure in enamel-finished birch plywood
• · Integral handles
• · Stand adapter
• · Ideal for use in all professional audio amplification systems to enhance low frequency components
• · Subwoofer system with 900W rms PWM power amplifier, “Pulse Width Modulation” technology makes it possible to reduce weight in a ratio of 1:3, achieving a level of efficiency 3 times higher than is possible using conventional technology
• · 380 mm Diecast frame aluminium custom LF woofer with ultra-light and ultra powerful 75 mm coil and neodymium magnet.
• · ADAP ® (Advanced Dynamic Active Protection)
• · Control panel for right and left channels with: Neutrik™ Combo XLR/Jack input Neutrik™, XLR link connector, filtered signal output (high-pass) for satellite speakers, master volume control

• · The lightweight, sturdy enclosure is made from shock-resistant polyethylene with rotomoulding
• · Handles built into the structure
• · Stand adapter
• · It can be used in all audio-professional amplification systems to enhance the low frequencies
• · Wall or ceiling installation available on request
• · Sub-Woofer system with passive filter
• · 380mm custom speaker with coil of 100mm with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• · Internal Crossover with very high quality components and designed for the utmost resistance to vibration
• · Drivers protected against overload and acoustic feedback
• · Flat frequency response over the entire dispersion angle
• · Recommended amplifier 700W
• · SPL 126.5/128 dB
• · Inputs panel with 2 Neutrik™ Speakon NL-4 connectors and links

Processed Active Sub-Woofer 900W

• · The lightweight, sturdy enclosure is made from shock-resistant polyethylene with rotomoulding
• · Handles built into the structure
• · Stand adapter
• · It can be used in all audio-professional amplification systems to enhance the low frequencies
• · Wall or ceiling installation available on request
• · Sub-Woofer system with power stage of 900W rms, PWM “Pulse Width Modulation” technology making it possible to decrease the weight in the ratio 1:3, achieving a level of efficiency 3 times higher than that of conventional technology
• · 380mm custom speaker with coil of 100mm with neodymium magnet, ultra-light and ultra powerful. Die-cast aluminium basket
• · ADAP ® (Advanced Dynamic Active Protection)
• · Control panel for right and left channels with: XLR/Jack Neutrik TM, input XLR Neutrik TM, Link, Filtered signal output (high-pass) for satellites, General volume

Jolly 12B A

Processed Active Monitor 250W+50W

· 2-way bi-amped bass-reflex speaker system with 320 mm woofer and 25 mm high frequency driver
· Extremely light and sturdy enclosure made of gas injection moulded polypropylene
· Integral handle, stand adapter, 2 M10 anchoring points and a comprehensive range of accessories for fixed installations
· Custom 90° x 60° dispersion horn
· Asymmetrical trapezoidal shape for use as a stage monitor
· Enormous application versatility: band PAs, small theatres and auditoriums, piano-bars, stage monitors and fixed installations in live music club venues, pubs, gyms and all other locations requiring high sound pressure 123dB SPL
· Custom 320 mm high efficiency high excursion woofer
· Custom 25 mm compression weeter
· Built-in amplifiers: 250W rms MOS-FET for the woofer and 50 W rms for the high frequency unit
· ADAP® (Advanced Dynamic Active Protection) designed to limit amplifier saturation and ensure complete reliability of the system even in extreme conditions
· 24dB/oct active filters
· Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, mic/line switch, 2 Band EQ – (high/low), limiter, volume control.

Jolly 12R A

Processed Active Monitor 150+50W

• · 2-way bi-amped bass-reflex speaker system with 320 mm woofer and 25 mm high frequency unit
• · Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• · Integral handle, stand adapter, 2 M10 anchoring points and a comprehensive range of accessories for fixed installations
• · Custom 90° x 60° dispersion horn
• · Asymmetrical trapezoidal shape for use as a stage monitor
• · Enormous application versatility: band P.A.s, piano-bars, stage monitoring and fixed installations in live music club venues, pubs, gyms, conference rooms and wherever excellent speech intelligibility is a primary requirement
• · Custom 320 mm high efficiency high excursion woofer
• · Custom 25 mm compression tweeter
• · Built-in class G amplifiers, 150W rms for the woofer and 50W rms for the high frequency unit
• · ADAP® (Advanced Dynamic Active Protection) designed to limit amplifier saturation and ensure complete reliability of the system even in extreme conditions
• · 24dB/oct active filters
• · Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, limiter, Volume control.

Jolly 8B A

Processed Active Monitor 150W+50W

• · 2-way bi-amped bass-reflex speaker system with 200 mm woofer and 25 mm high frequency unit
• · Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• · Integral handle, stand adapter, 2 M6 anchoring points and a comprehensive range of accessories for fixed installations
• · Custom 90° x 60° dispersion horn
• · Asymmetrical trapezoidal shape for use as a stage monitor
• · An ideal choice for live performance applications thanks to the reduced dimensions in relation to the hefty 119dB SPL, along with frequency response that excels in terms of linearity and extension.
• · Enormous application versatility: band P.A.s, piano-bars, home and live monitors, and fixed installations in live music club venues, pubs, gyms, and all other venues requiring high sound pressure combined with compact dimensions
• · Custom 200 mm high efficiency high excursion woofer
• · Custom 25 mm compression tweeter
• · Built-in amplifiers: 150W rms class G for the woofer and 50W rms for the high frequency unit
• · ADAP® (Advanced Dynamic Active Protection) designed to limit amplifier saturation and ensure complete reliability of the system even in extreme conditions
• · 24dB/oct active filters
• · Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, mic/line switch, 2 Band EQ – (high/low), limiter, volume control

Jolly 8R A

Processed Active Monitor 80W+20W

• · 2-way bi-amped bass-reflex speaker system with 200 mm woofer and 25 mm high frequency unit
• · Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• · Integral handle, stand adapter, 2 M6 anchoring points and a comprehensive range of accessories for fixed installations
• · Custom 90° x 60° dispersion horn
• · Asymmetrical trapezoidal shape for use as a stage monitor
• · Affordable and highly effective solution for a limitless range of applications: personal monitor, piano-bars, home and live monitor, and fixed installations in clubs, pubs, gyms, conference rooms and wherever requirements specify excellent speech intelligibility combined with high quality, powerful music reproduction with 114dB SPL
• · Custom 200 mm high efficiency woofer
• · Custom 25 mm tweeter
• · Built-in amplifiers: 80W rms for the woofer and 50W rms for the HF driver/horn
• · 24dB/oct active filters
• · Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, limiter, volume control

Jolly 5B A

Processed Active Monitor 60W+20w

• · 2-way bi-amped bass-reflex speaker system with 130 mm woofer and 25 mm tweeter
• · Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• · Stand adapter, 2 M6 anchoring points and a comprehensive range of accessories for fixed installations
• · Extended 90° x 90° dispersion angle
• · Very high power (112dB SPL) and compact dimensions for an unlimited range of applications: personal monitor, piano-bars, home entertainment systems, and fixed installations in clubs, pubs, gyms, conference rooms, etc.
• · Custom 130 mm high efficiency woofer
• · 25 mm tweeter
• · Built-in amplifiers: 60W rms for the woofer and 20Wrms for the tweeter
• · 24dB/oct active filters
• · Control panel with: Ground-lift switch, Combo XLR/jack inputs, XLR male output, mic/line switch, 2 Band EQ – (high/low), limiter, volume control
• · Available as white finish version: JOLLY 5baw

Jolly 5R A

Processed Active Monitor 60W

• · 2-way amplified bass-reflex system with 130 mm woofer and 25 mm high frequency tweeter
• · Extremely light and sturdy enclosure made of gas injection moulded polypropylene
• · Stand adapter, 2 M6 anchoring points and a comprehensive range of accessories for fixed installations
• · Extended 90° x 90° dispersion angle
• · Unlimited range of applications:personal monitor, piano-bars, home and live monitor and fixed installations in clubs, pubs, gyms, bars, shops, conference rooms, etc.
• · Custom 130 mm high efficiency woofer
• · 25 mm tweeter
• · Built-in 60Wrms amplifier and passive crossover for 107dB SPL
• · Control panel with: 1 combo line input (jack – XLR), XLR Link and volume control

Jolly Sub 12A

Processed Active Sub-woofer 300W

• · Vented bandpass active subwoofer with 320 mm driver
• · Enclosure in 18 mm birch plywood with internal reinforcement and scratch-resistant finish,ergonomically placed carry handles, integral speaker socket for satellite speakers
• · High 123dB SPL thanks to the special loading design that serves to increase efficiency with significant reduction of distortion at high volume
• · Reduced size in relation to power output and extension of frequency response (45Hz @ -6dB)
• · The ideal companion for loudspeakers in the JOLLY5 and JOLLY8 series to strengthen bass frequencies and extend the response range, resulting in total increase of SPL
• · extend the response range, resulting in total increase of SPL