|
Your
Sound Source.com and Muzeek World now United. Much Bigger discounts,
and outstanding service- Now serving the Nation with the right gear
at the right price-
CHOOSE
YOUR LIVE MICROPHONE
Audio Technica Midnight Blues
Meet the industry standard in affordable vocal and instrument microphones:
Audio-Technica's totally redesigned Midnight Blues Series. Distinctive
styling, high-output design and all-metal construction set Midnight
Blues apart from all other mics in their class. You don't have to
spend a fortune to cut through the mix and make a statement: Midnight
Blues microphones deliver loud and clear performance on a budget.
1-877-477-6432 for pricing
Audio
Technica 200 series wireless |
 Advanced
dipole antenna system
Available in three traveling frequencies
Removable docking power supply inserts into back of receiver
Adjustable squelch control
ATW-T201 UniPakTM transmitter includes variable microphone/guitar
trim control
ATW-T202 handheld microphone/transmitter features a rugged dynamic
unidirectional element
ATW-201 UniPakTM Transmitter System
Includes: ATW-R200 receiver and ATW-T201 transmitter. Select
a Wireless Essentials® microphone or cable to complete the system.
ATW-201/G UniPakTM Guitar System
Includes: ATW-R200 receiver, ATW-T201 transmitter and Hi-Z
instrument input cable
ATW-201/H UniPakTM Headworn Microphone
System
Includes: ATW-R200 receiver, ATW-T201 transmitter and PRO
8HEcW headworn microphone
ATW-201/L UniPakTM Lavalier Microphone
System
Includes: ATW-R200 receiver, ATW-T201 transmitter and AT829cW
lavalier microphone
ATW-202 Handheld Microphone System
Includes: ATW-R200 receiver and ATW-T202 handheld microphone/transmitter
200 Series Freeway
Overall System
Operating Frequencies VHF band, 169.505, 170.245, 171.905
MHz
Frequency Stability ±0.005%
Modulation Mode FM
Maximum Deviation ±15 kHz
Operating Range 200' minimum
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Frequency Response 80 Hz to 13 kHz
ATW-R200 Receiver
Receiving System Non-diversity, single-channel dual antenna
system
Image Rejection 50 dB minimum
Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted),
maximum modulation 15 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 20 dBµV for 60 dB S/N (IEC-weighted)
Audio Output 350 mV (at 1 kHz, ±10 kHz deviation, 100 k ohm
load)
Output Connector 1/4" phone jack
Power Supply 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center
positive, with external DC supply
Dimensions 8.27" (210.0 mm) W x 1.72" (43.5 mm)
H x 4.73" (120.0 mm) D
Net Weight 18.9 oz (536 grams); without AC adapter, 11.9 oz
(336 grams)
Accessories Included AD1202A 120V docking AC adapter; 120V
AC IEC cordset
ATW-T201 UniPakTM Transmitter
RF Power Output 10 mW (High) and 2 mW (Low) typical
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB, A-weighted
Input Connections High impedance, low impedance, bias
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 30 mA typical
Battery Life Approximately 15 hours (High) and 20 hours (Low)
Dimensions 2.56" (65.0 mm) W x 4.33" (110.0 mm)
H x 1.00" (25.4 mm) D
Net Weight (without battery) 2.8 oz (78 grams)
ATW-T202 Handheld Transmitter
RF Power Output 10 mW (High) and 2 mW (Low) typical
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB, A-weighted
Microphone Element Dynamic unidirectional
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 30 mA typical
Battery Life Approximately 15 hours (High) and 20 hours (Low)
Dimensions 9.50" (241.3 mm) long, 2.10" (53.3 mm)
diameter
Net Weight (without battery) 12.7 oz (360 grams)
Accessory Included AT8456a stand clamp
|
 |
300
Series |
 ATW-0327
UniPakTM Body-pack System
ATW-0328 Handheld Microphone System
Versatile performance, easy operation and
long-term dependability
Advanced dipole antenna system extends operating range
InvisibleLink® circuitry delivers optimum sound quality
Dual-power battery-save switches on transmitters
ATW-T27 UniPakTM transmitter includes Super Hi-Z input that
provides optimum load for guitar pickups
ATW-T28 handheld microphone/transmitter features Hi-ENERGY®
dynamic element with superior internal shock mounting
300 Series Systems
UniPakTM Body-pack System ATW-0327 ATW-R03
receiver and ATW-T27 UniPakTM transmitter. Select a Wireless
EssentialsTM microphone or cable to complete the system.
Handheld Microphone System
ATW-0328 ATW-R03 receiver and ATW-T28 handheld unidirectional
dynamic microphone/transmitter.
300 Series Specifications
Overall System
Operating Frequency VHF band, 169 MHz to 207 MHz
Frequency Stability ±0.005%
Modulation Mode FM
Maximum Deviation ±15 kHz
Operating Range 200' minimum
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Frequency Response 100 Hz to 15 kHz
ATW-R03 Receiver
Receiving System Non-diversity single-channel dual antenna
system
Image Rejection 50 dB minimum
Signal-to-noise Ratio 87 dB at 10 kHz deviation (IEC-weighted),
maximum modulation 15 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 10 µV for 60 dB S/N (IEC-weighted)
Audio Output 350 mV (1 kHz modulation, 10 kHz deviation, 1M
ohm load)
Output Connector 1/4" phone jack
Power Supply 12V DC, 300 mA, with provided AC adapter
Dimensions 4.33" (110.0 mm) W x 1.38" (35.1 mm)
H x 8.27" (210.1 mm) D
Net Weight 10.2 oz (289 grams)
Accessory Included AD1203A AC adapter
ATW-T27 UniPakTM Transmitter
RF Power Output 50 mW Max
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB
Input Connections High impedance, low impedance, bias
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 30 mA typical
Battery Life Approximately 15 hours in High position, approximately
20 hours in Low position
Dimensions 2.56" (65.0 mm) W x 4.33" (110.0 mm)
H x 1.00" (25.4 mm) D
Net Weight (without battery) 2.8 oz (78 grams)
ATW-T28 Handheld Transmitter
RF Power Output 50 mW Max
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB
Microphone Element Dynamic unidirectional
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 30 mA typical
Battery Life Approximately 15 hours in High position, approximately
20 hours in Low position
Dimensions 9.50" (241.3 mm) long, 2.10" (53.3 mm)
diameter
Net Weight (without battery) 12.7 oz (360 grams)
Accessory Included AT8431 stand clamp |
|
600
Series |
 Frequency-agile
with 10 selectable UHF channels
Available in two frequency bands:
Band A: 470 - 480 MHz (TV channels 14 - 15)
Band B: 482 - 492 MHz (TV channels 16 - 17)
Advanced dipole antenna system
Adjustable squelch control
Removable docking power supply inserts into back of receiver
ATW-T601 UniPakTM transmitter includes Super Hi-Z input that
provides optimum load for guitar pickups
ATW-T602 handheld microphone/transmitter features a dynamic
unidirectional element with superior internal shock mounting
ATW-601 UniPakTM Transmitter System
Includes: ATW-R600 receiver and ATW-T601 transmitter. Select
a Wireless Essentials® microphone or cable to complete the system.
ATW-601/G UniPakTM Guitar System
Includes: ATW-R600 receiver, ATW-T601 transmitter and Hi-Z
instrument input cable
ATW-601/H UniPakTM Headworn Microphone
System
Includes: ATW-R600 receiver, ATW-T601 transmitter and PRO
8HEcW headworn microphone
ATW-601/L UniPakTM Lavalier Microphone
System
Includes: ATW-R600 receiver, ATW-T601 transmitter and AT829cW
lavalier microphone
ATW-602 Handheld Microphone System
Includes: ATW-R600 receiver and ATW-T602 handheld microphone/transmitter
600 Series Freeway® Specifications*
Overall System
Operating Frequency UHF band
Band A: 470.000 MHz to 479.750 MHz
Band B: 482.000 MHz to 491.750 MHz
Number of channels 10
Frequency Stability ±0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Maximum Deviation ±15 kHz
Operating Range 150' minimum
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Frequency Response ATW-601: 50 Hz to 16 kHz
ATW-602: 100 Hz to 13 kHz
ATW-R600 Receiver
Receiving System Non-diversity, 10 channel synthesized, dual
antenna system
Image Rejection 50 dB minimum
Signal-to-noise Ratio 80 dB at 10 kHz deviation (IEC-weighted),
maximum modulation 15 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 25 µV for 60 dB S/N (IEC-weighted)
Audio Output 350 mV (at 1 kHz, ±10 kHz deviation, 100k ohm
load)
Output Connector 1/4" phone jack
Power Supply 120V AC 60 Hz, 6 VA; or 12V DC, 200 mA, center
positive, with external DC supply
Dimensions 8.27" (210.0 mm) W x 1.72" (43.5 mm)
H x 4.73" (120.0 mm) D
Net Weight 18.9 oz (536 grams); without AC adapter, 11.9 oz
(336 grams)
Accessories Included AD1202A 120V docking AC adapter; 120V
AC IEC cordset
ATW-T601 UniPakTM Transmitter
RF Power Output 10 mW nominal, 5 mW typical
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB, A-weighted
Input Connections High impedance, low impedance, bias
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 60 mA typical
Battery Life 4-5 hours
Dimensions 2.56" (65.0 mm) W x 4.41" (112.0 mm)
H x 0.87" (22.0 mm) D
Net Weight (without battery) 3.2 oz (89 grams)
ATW-T602 Handheld Transmitter
RF Power Output 10 mW nominal, 5 mW typical
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB, A-weighted
Microphone Element Dynamic unidirectional
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 60 mA typical
Battery Life 4-5 hours
Dimensions 9.65" (245.0 mm) long, 2.11" (53.5 mm)
diameter
Net Weight (without battery) 11.2 oz (316 grams)
Accessory Included AT8456a stand clamp
*Except for operating frequencies, specifications
for "A" and "B" units are identical.
|
|
1100 Series |
 ATW-1127
UniPakTM Body-pack System
ATW-1128 Handheld Microphone System
True diversity reception and full FM deviation
Choice of 20 VHF frequencies
InvisibleLink® circuitry delivers optimum sound quality
Ground-lift switch and adjustable squelch control
Balanced and unbalanced audio output jacks
Receiver mounts in a single 19" rack space
Dual-power battery-save switches on transmitters
ATW-T27 UniPakTM transmitter includes Super Hi-Z input that
provides optimum load for guitar pickups
ATW-T28 handheld microphone/transmitter features a Hi-ENERGY®
dynamic element with superior internal shock mounting
1100 Series Systems
UniPakTM Body-pack System ATW-1127 ATW-R11
receiver and ATW-T27 UniPakTM transmitter. Select a Wireless
Essentials® microphone or cable to complete the system.
Handheld Microphone System
ATW-1128 ATW-R11 receiver and ATW-T28 handheld unidirectional
dynamic microphone/transmitter.
1100 Series Specifications
Overall System
Operating Frequency VHF high band, 169 MHz to 216 MHz
Frequency Stability ±0.005%, single-frequency crystal-controlled
Modulation Mode FM
Maximum Deviation ±30 kHz, traveling frequencies ±15 kHz
Operating Range 200' minimum
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Frequency Response 100 Hz to 15 kHz
ATW-R11 Receiver
Receiving System Dual independent receivers, automatic-switching
diversity reception
Image Rejection >=60 dB
Signal-to-noise Ratio 95 dB at 10 kHz deviation (IEC-weighted),
maximum modulation 15 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 10 µV for 60 dB S/N (IEC-weighted)
Audio Output Unbalanced: 350 mV (at 1 kHz, ±10 kHz deviation,
10k ohm load) Balanced: 220 mV (at 1 kHz, ±10 kHz deviation,
10k ohm load)
Output Connectors Unbalanced: 1/4" phone jack Balanced:
XLRM-type
Power Supply 12-18V DC, 350 mA, with provided AC adapter
Dimensions 16.93" (430.0 mm) W x 1.92" (48.8 mm)
H x 7.28" (185.0 mm) D
Net Weight 5.5 lbs (2.5 kg)
Accessories Included Two whip antennas, rack-mount adapters,
AD1205A AC adapter
ATW-T27 UniPakTM Transmitter
RF Power Output 50 mW Max
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB
Input Connections High impedance, low impedance, bias
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 30 mA typical
Battery Life Approximately 15 hours in High position, approximately
20 hours in Low position
Dimensions 2.56" (65.0 mm) W x 4.33" (110.0 mm)
H x 1.00" (25.4 mm) D
Net Weight (without battery) 2.8 oz (78 grams)
ATW-T28 Handheld Transmitter
RF Power Output 50 mW Max
Spurious Emissions Under federal regulations
Dynamic Range >=90 dB
Microphone Element Dynamic unidirectional
Battery (not included) 9V (NEDA type 1604) alkaline
Current Consumption 30 mA typical
Battery Life Approximately 15 hours in High position, approximately
20 hours in Low position
Dimensions 9.50" (241.3 mm) long, 2.10" (53.3 mm)
diameter
Net Weight (without battery) 12.7 oz (360 grams)
Accessory Included Stand clamp |
|
1400
Series Systems |
 ATW-1451
UniPakTM Body-pack System
ATW-1452 Handheld Microphone System
ATW-1453 Dual Transmitter System
True Diversity reception with two independent RF sections for
greatest reliability
Interference-resistant UHF band operation
Convenient detachable front-mount antennas
Rugged metal receiver housing
Balanced and unbalanced audio output jacks
Ground-lift switch and adjustable squelch
Two receivers can be mounted side-by-side in a single 19"
rack space
Power-save switches on transmitters
ATW-T51 UniPakTM transmitter includes Super Hi-Z input that
provides optimum load for guitar pickups
ATW-T52 handheld microphone/transmitter features a Hi-ENERGY®
dynamic element
1400 Series Systems
UniPakTM Body-pack System
ATW-1451 ATW-R14 receiver and ATW-T51 UniPakTM transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
Handheld Microphone System ATW-1452
ATW-R14 receiver and ATW-T52 handheld unidirectional dynamic
microphone/transmitter.
Dual Transmitter System ATW-1453
ATW-R14 receiver, ATW-T52 handheld microphone/transmitter,
ATW-T51 UniPakTM transmitter and AT831cW lavalier microphone.
|
|
3000
Series |
 ATW-3110
UniPak™ Body-pack System
ATW-3141 Handheld Dynamic Microphone System
200 PLL-synthesized channels per band selectable via soft-touch
controls on receiver and transmitter
Available in two frequency bands:
541.500 - 566.375 MHz (TV Channels 25 - 30) and
655.500 - 680.375 MHz (TV Channels 44 - 49). For information
on frequency compatibility, click here.
True Diversity operation selects the better signal from two
independent receiver sections, reducing dropouts
Interference-resistant UHF band operation
Advanced digital ToneLock™ squelch
Red alert light that warns of low battery power, signal loss
and input overload
Transmitter battery-life fuel gauge on the receiver
Ground-lift switch
Balanced and unbalanced audio output jacks
Two receivers can be mounted side-by-side in a single 19"
rack space
ATW-T310 UniPak™ transmitter includes Super Hi-Z input that
provides optimum load for guitar pickups
ATW-T341 handheld microphone/transmitter features the Artist
Elite® AE4100 cardioid dynamic element
3000 Series Systems
UniPak™ Body-pack System ATW-3110 ATW-R310
receiver and ATW-T310 UniPak™ transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
Handheld Microphone
System ATW-3141 ATW-R310 receiver and ATW-T341 handheld cardioid
dynamic microphone/transmitter.
3000 Series Specifications
Overall System
Operating Frequency UHF band
Band C: 541.500 MHz to 566.375 MHz
Band D: 655.500 MHz to 680.375 MHz
Number of Channels 200 total per band
Frequency Stability ±0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Normal Deviation ±10 kHz
Operating Range 300' typical
Operating Temperature Range 41° F (5° C) to 113° F (45° C)
Frequency Response 70 Hz to 15 kHz
ATW-R310 Receiver
Receiving System Dual independent receivers, automatic-switching
diversity
Image Rejection 60 dB nominal, 55 dB minimum
Signal-to-noise Ratio 110 dB at 35 kHz deviation (IEC-weighted),
maximum modulation 75 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 24 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Intermediate Frequency 85.38 MHz, 10.7 MHz
Audio Output (AF Level set at "0") Unbalanced: 50
mV (at 1 kHz, ±5 kHz deviation, 10k ohm load)
Balanced: 32 mV (at 1 kHz, ±5 kHz deviation, 10k ohm load)
Output Connectors Unbalanced: 1/4" TS ("mono")
phone jack
Balanced: XLRM-type
Power Supply 120V AC 60 Hz; 12-18V DC, 500 mA, center positive,
with external supply
Dimensions 8.27" (210.0 mm) W x 1.93" (49.0 mm)
H x 6.93" (176.0 mm) D
Net Weight 2.4 lbs (1.1 kg)
Accessories Included AD1205AA 120V 60 Hz in-line AC adapter,
two flexible UHF antennas, rack-mount adapters
ATW-T310 UniPak™ Transmitter
RF Power Output High: 30 mW; Low: 10 mW, nominal
Spurious Emissions Under federal regulations
Dynamic Range >=110 dB, A-weighted
Input Connections High impedance, low impedance, bias
Batteries (not included) Two 1.5V AA alkaline
Current Consumption High: 200 mA; Low: 150 mA, typical
Battery Life Approximately 6 hours (High) and 8 hours (Low)
(depending on battery type and use pattern)
Dimensions 2.60" (66.0 mm) W x 3.43" (87.0 mm) H
x 0.94" (24.0 mm) D
Net Weight (without batteries) 2.8 oz (80 grams)
ATW-T341 Handheld Transmitter
RF Power Output High: 30 mW; Low: 10 mW, nominal
Spurious Emissions Under federal regulations
Dynamic Range >=110 dB
Microphone Element Dynamic cardioid (unidirectional)
Batteries (not included) Two 1.5V AA alkaline
Current Consumption High: 230 mA; Low: 180 mA, typical
Battery Life Approximately 6 hours (High) and 8 hours (Low)
(depending on battery type and use pattern)
Dimensions 9.33" (237.0 mm) long, 1.89" (48.0 mm)
diameter
Net Weight (without batteries) 9.9 oz (280 grams) |
|
4000 Series Systems
|
 200
selectable UHF channels per band and True Diversity reception
for interference-resistant operation
Available in two frequency bands:
541.500 - 566.375 MHz (TV Channels 25 - 30) and
655.500 - 680.375 MHz (TV Channels 44 - 49)
IntelliScan™ feature automatically finds and sets best available
frequencies on all linked receivers
Advanced digital Tone Lock™ squelch effectively blocks stray
RF; the digitally encoded tone also communicates transmitter
data for receiver display
Dual Compander circuitry processes high and low frequencies
separately for unmatched audio quality
Link and coordinate multiple receiver channels
High-visibility white-on-blue LCD information display
Metal half-rack receiver chassis with mounting hardware
All transmitters offer rugged, ergonomic metal bodies, programmable
features, soft-touch controls, and 10 mW/35 mW switchable RF
power
All components store up to five preset configurations, with
customized "names" if desired
4000 Series Systems
UniPak™ Body-pack System
AEW-4110 AEW-R4100 receiver and AEW-T1000 UniPak™ transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
Handheld Microphone Systems
AEW-4230 AEW-R4100 receiver and AEW-T3300 cardioid condenser
microphone/transmitter.
AEW-4240 AEW-R4100 receiver and AEW-T4100 cardioid dynamic
microphone/transmitter.
AEW-4250 AEW-R4100 receiver and AEW-T5400 cardioid condenser
microphone/transmitter.
AEW-4260 AEW-R4100 receiver and AEW-T6100 hypercardioid dynamic
microphone/transmitter.
Dual-Transmitter Systems
AEW-4313 AEW-R4100 receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T3300 cardioid condenser microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-4314 AEW-R4100 receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T4100 cardioid dynamic microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-4315 AEW-R4100 receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T5400 cardioid condenser microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-4316 AEW-R4100 receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T6100 hypercardioid dynamic microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
|
|
5000
Series Systems |
 Two
independent receivers in a single housing
200 selectable UHF channels per band and True Diversity reception
for interference-resistant operation
Available in two frequency bands:
541.500 - 566.375 MHz (TV Channels 25 - 30) and
655.500 - 680.375 MHz (TV Channels 44 - 49)
IntelliScan™ feature automatically finds and sets best available
frequencies on all linked receivers
On-board Ethernet interface for monitoring and controlling system
parameters with included AEW Control Interface software
(click to download)
Advanced digital Tone Lock™ squelch effectively blocks stray
RF; the digitally encoded tone also communicates transmitter
data for receiver display
Dual Compander circuitry processes high and low frequencies
separately for unmatched audio quality
1/4" external mute switch jack allows user to mute the
system quickly and easily
AC pass-through allows daisy-chain AC hookup with included IEC
jumper cables
Link and coordinate multiple receiver channels
High-visibility white-on-blue LCD information display
Metal full-rack receiver chassis with reinforced mounting ears
and rear rack mount capability
All transmitters offer rugged, ergonomic metal bodies, programmable
features, soft-touch controls, and 10 mW/35 mW switchable RF
power
All components store up to five preset configurations, with
customized "names" if desired
5000 Series Systems
Dual-UniPak™ Body-pack System
AEW-5111 AEW-R5200 dual receiver and two AEW-T1000 UniPak™
transmitters.
Select a Wireless Essentials® microphone or cable to complete
the system.
Dual-Handheld Microphone Systems AEW-5233
AEW-R5200 dual receiver and two AEW-T3300 cardioid condenser
microphone/transmitters.
AEW-5244 AEW-R5200 dual receiver and two AEW-T4100 cardioid
dynamic microphone/transmitters.
AEW-5255 AEW-R5200 dual receiver and two AEW-T5400 cardioid
condenser microphone/transmitters.
AEW-5266 AEW-R5200 dual receiver and two AEW-T6100 hypercardioid
dynamic microphone/transmitters.
Dual-Transmitter Systems
AEW-5313 AEW-R5200 dual receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T3300 cardioid condenser microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-5314 AEW-R5200 dual receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T4100 cardioid dynamic microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-5315 AEW-R5200 dual receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T5400 cardioid condenser microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-5316 AEW-R5200 dual receiver, AEW-T1000 UniPak™ transmitter,
and AEW-T6100 hypercardioid dynamic microphone/transmitter.
Select a Wireless Essentials® microphone or cable to complete
the system.
Dual-UniPak™ and Dual-Handheld
Microphone Systems AEW-5413 AEW-R5200 dual receiver,
two AEW-T1000 UniPak™ transmitters, and two AEW-T3300 cardioid
condenser microphone/transmitters.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-5414 AEW-R5200 dual receiver, two AEW-T1000 UniPak™ transmitters,
and two AEW-T4100 cardioid dynamic microphone/transmitters.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-5415 AEW-R5200 dual receiver, two AEW-T1000 UniPak™ transmitters,
and two AEW-T5400 cardioid condenser microphone/transmitters.
Select a Wireless Essentials® microphone or cable to complete
the system.
AEW-5416 AEW-R5200 dual receiver, two AEW-T1000 UniPak™ transmitters,
and two AEW-T6100 hypercardioid dynamic microphone/transmitters.
Select a Wireless Essentials® microphone or cable to complete
the system. |
|
7000 Series Systems
|
 ATW-7373
Handheld Condenser Microphone System
ATW-7375 UniPak™ Body-pack System
ATW-7376 Handheld Dynamic Microphone System
Available in two frequency ranges:
656 - 668 MHz (TV channels 45 - 47) and 728 - 740 MHz (TV channels
57 - 59)
100 PLL-synthesized channels selectable via switches on receiver
and transmitter
True Diversity operation selects the better signal from two
independent receiver sections, reducing dropouts
Interference-resistant UHF band operation
InvisibleLink® circuitry for optimum sound quality
Ground-lift switch and adjustable squelch control
Balanced and unbalanced audio output jacks
Two receivers can be mounted side-by-side in a single 19"
rack space
ATW-T73 handheld microphone/transmitter features the same condenser
element used in the legendary AT4033 studio microphone
ATW-T75 UniPak™ transmitter includes Super Hi-Z input that provides
optimum load for guitar pickups
ATW-T76 handheld microphone/transmitter features a Hi-ENERGY®
dynamic element with superior internal shock mounting
7000 Series Systems
UniPak™ Body-pack Systems
ATW-7375 ATW-R73 receiver and ATW-T75 UniPak™ transmitter
(728 - 740 MHz range).
Select a Wireless Essentials™ microphone or cable to complete
the system.
ATW-7375x ATW-R73x receiver and ATW-T75x UniPak™ transmitter
(656 - 668 MHz range).
Select a Wireless Essentials™ microphone or cable to complete
the system.
Handheld Microphone Systems
ATW-7373 ATW-R73 receiver and ATW-T73 handheld unidirectional
condenser microphone/transmitter (728 - 740 MHz range).
ATW-7373x ATW-R73x receiver and ATW-T73x handheld unidirectional
condenser microphone/transmitter (656 - 668 MHz range).
ATW-7376 ATW-R73 receiver and ATW-T76 handheld unidirectional
dynamic microphone/transmitter (728 - 740 MHz range).
ATW-7376x ATW-R73x receiver and ATW-T76x handheld unidirectional
dynamic microphone/transmitter (656 - 668 MHz range).
7000 Series Specifications*
Overall System
Operating Frequency UHF band
"x" systems: 656.125 MHz to 668.500 MHz
non-"x" systems: 728.125 MHz to 740.500 MHz
Number of Channels 100 total
Frequency Stability ±0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Normal Deviation ±10 kHz
Operating Range 300' typical
Operating Temperature Range 41° F (5° C) to 113° F (45° C)
Frequency Response 100 Hz to 15 kHz
|
|
ATM73a
|
 Ideal
for drummers, keyboard players or anyone requiring hands-free
operation
Comfortable, unobtrusive headband design with side-of-mouth
pickup
Belt-mounted power module operates on battery or phantom power
3' (0.9 m) cable permanently attached between microphone and
power module
Also available as:
ATM73ac -- less power module; 55" (1.4 m) cable, unterminated;
Wiring info (pdf - 67KB)
ATM73cW -- less power module; 55" (1.4 m) cable terminated
with locking 4-pin connector for A-T UniPak™ wireless systems
ATM73a Specifications
Element Phantom Power Requirements
Condenser
9 - 52V, 2 mA typical
Polar Pattern Battery Type
Cardioid
1.5V AA/UM3
Frequency Response Battery Current/Life
60 - 15,000 Hz
1 mA/1000 hours typical
Open Circuit Sensitivity Switch
-56 dB (1.5 mV) re 1V at 1 Pa
Off/on-flat/on-roll-off
Impedance Low Frequency Roll-off
200 ohms
150 Hz, 6 dB per octave
Maximum Input Sound Level Weight
135 dB SPL, 1 kHz at 1% T.H.D.
1.1 oz (31 g)
Signal to Noise Ratio Power Module
60 dB, 1 kHz at 1 Pa
In-line
Dynamic Range (Typical) Output Connector
101 dB, 1 kHz at Max. SPL
XLRM-type (power module)
Accessories Furnished: Windscreen; AT8530 power module (attached);
battery
|
|
Audio technica
AE3300 |
 Audio
technica AE3300 Exceptional performance for exceptional
performers
Exacting detail, brilliant clarity and uncolored realism
Well-tempered polar pattern with outstanding rejection qualities
Superior anti-shock engineering ensures low handling noise and
quiet performance
Excellent protection against plosives and sibilance without
compromising high-frequency clarity
Robust design for enduring dependability on the road
Integral 80 Hz HPF switch and 10 dB pad |
|
Audio Technica
AT822 |
 Audio
Technica AT822 Ideal for DAT recording as well as television,
FM and field applications
Compact, lightweight design is perfect for camera-mount use
Closely-matched elements provide the spatial impact and realism
of a live sound field
Excellent channel separation
Switchable low-frequency roll-off
Includes a 1.7' (0.5 m) cable (XLRF-type to stereo 3.5 mm mini-plug);
and a 10' (3 m) cable (XLRF-type to two mono 3.5 mm mini-plugs)
Battery operation only
AT822 Specifications
Elements Dynamic Range (Typical)
Condenser
101 dB, 1 kHz at Max. SPL
Polar Pattern Battery Type
X/Y Stereo
1.5V AA/UM3
Frequency Response Battery Current/Life
30 - 20,000 Hz
1.2 mA/1000 hours typical
Open Circuit Sensitivity Switch
-45 dB (5.6 mV) re 1V at 1 Pa
Off/flat/roll-off
Impedance Low Frequency Roll-off
200 ohms
150 Hz, 6 dB per octave
Maximum Input Sound Level Weight
125 dB SPL, 1 kHz at 1% T.H.D.
5.8 oz (165 g)
Signal to Noise Ratio Output Connector
70 dB, 1 kHz at 1 Pa
3-pin XLRM-type, unbalanced output
Accessories Furnished: Gun-grip/stand clamp; camera shoe-mount
adapter; AT8120 windscreen; battery; protective pouch |
|
Audio
Technica AT841Wa |
 Audio
Technica AT841Wa Designed for surface-mount applications
requiring high-quality sound pickup
Heavy die-cast case and rubber bottom pad minimize coupling
of surface vibration to the microphone
Operates on battery or phantom power
Low-profile design for minimum visibility
25' (7.6 m) detachable cable with TA3F connectors
Also available in white as AT841Wa
|
|
Audio
Technica AT849 |
 Audio
Technica AT849 Designed primarily for surface-mount
applications in broadcast, professional recording and sound
reinforcement
Closely-matched optimally-positioned UniPoint® elements deliver
the spatial impact and realism of a live sound field
Heavy die-cast case and rubber bottom pad minimize coupling
of surface vibration to the microphone
Switchable low-frequency roll-off
Low-profile design for minimum visibility
25' (7.6 m) detachable cable (TA5F to two 3-pin XLRM-type connectors |
|
Audio
Technica 854r |
 Audio
Technica 854r Four independent cardioid condenser elements
in one housing
Ideal for a variety of video and audio conferencing applications
Four shielded, balanced lines in a single, flexible 30' (9.1
m) cable
Individual connection and control of each channel
Low-profile design for minimum visibility |
|
AT857AMLa |
 Designed
for high-quality sound reinforcement, professional recording
and broadcasting
Accepts interchangeable elements to permit angle of acceptance
from 100º to 360º
Small-diameter, alternating gooseneck design permits highly
flexible positioning
Direct mounts to any 5/8"-27 stand, or to included threaded
mounting stud
Operates on battery or phantom power
9.8' (3.0 m) cable permanently attached to mic, TA3F connector
at power module
Overall length of 12.21" (310.2 mm)
Also available as:
AT857AMLa -- a 19" (482.6 mm)-long version
of the AT857AMa
AT857AMLcW -- AT857AMLa less power module; 29.5" (0.75
m) cable terminated with locking 4-pin connector for A-T UniPak™
wireless systems
AT857AMLa Designed for high-quality sound reinforcement,
professional recording and broadcasting
Accepts interchangeable elements to permit angle of acceptance
from 100º to 360º
Small-diameter, alternating gooseneck design permits highly
flexible positioning
Direct mounts to any 5/8"-27 stand, or to included threaded
mounting stud
Operates on battery or phantom power
9.8' (3.0 m) cable permanently attached to mic, TA3F connector
at power module
Overall length of 12.21" (310.2 mm)
Also available as:
AT857AMLa -- a 19" (482.6 mm)-long version of the AT857AMa
AT857AMLcW -- AT857AMLa less power module; 29.5" (0.75
m) cable terminated with locking 4-pin connector for A-T UniPak™
wireless systems
|
|
AT3032 |
 Outstanding
performance and versatility
High max SPL and wide dynamic range
Low self-noise (16 dB SPL) – perfectly suited for today's most
sophisticated digital recording equipment
Flat, extended frequency response
Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
AT3032 Specifications
Element Dynamic Range (Typical)
Condenser
132 dB, 1 kHz at Max. SPL
Polar Pattern Phantom Power Requirements
Omnidirectional
11 - 52V, 3 mA typical
Frequency Response Switches
30 - 20,000 Hz
10 dB pad; roll-off
Open Circuit Sensitivity Low Frequency Roll-off
-34 dB (19.9 mV) re 1V at 1 Pa
80 Hz, 12 dB per octave
Impedance Weight
250 ohms
4.0 oz (112 g)
Maximum Input Sound Level Output Connector
148 dB SPL, 1 kHz at 1% T.H.D.
Integral 3-pin XLRM-type
Signal to Noise Ratio
78 dB, 1 kHz at 1 Pa
Accessories Furnished: AT8405 stand clamp; foam windscreen;
protective pouch |
|
Audio
Technica 4041 |
 Audio
Technica 4041 Smooth, extended frequency response with
a slight rise occurring in the high-frequency region
Ideal for drum overheads, acoustic guitar, piano, horns and
under snare
Low-mass diaphragm improves transient response, increases response
bandwidth and reduces handling and mechanical noise transfer
Transformerless circuitry virtually eliminates low-frequency
distortion and provides superior correlation of high-speed transients
|
|
