Available in mirror-imaged left/right pairs
Horizontal format 3-way system
Horn-loaded MF/HF (90° x 50° dispersion pattern) 15 in LF; 7 in MF; 1 in exit HF
Switchable powering: full-range passive or bi-amplified (passive MF/HF)
Digital signal processor required to achieve specified performance

General Application
Install

Size
Small/Medium

Description
A 3-way full range bi-amp system in a vented rectangular enclosure. Includes a 15 in woofer, a horn-loaded 6.5 in midbass cone and a 1 in exit/1.75 in voice coil HF compression driver on a 90° x 50° constant directivity horn.

Applications
The AS300e is engineered for use in permanent installations. It adapts Virtual Array™ technology to compact, mirror-imaged rectangular enclosures. True 3-way design dramatically improves the quality of speech reproduction, while the cone-driven MF horn extends pattern control into the LF range. With comprehensive 3/8-16 mounting points, the AS300e is a flexible, yet powerful, installation tool.

Dedicated LF array module
Single direct radiating 15 in LF woofer
Enclosure angle ideal for arraying with two AS460e mid/high loudspeakers
Digital signal processor required to achieve specified performance


General Application
Install

Size
Small/Medium

Description
A dedicated LF array module with a single direct radiating 15 in woofer for use with AS460e or AS490e. The AS415e offers lower frequency extension but less SPL capability than the AS422e.

Applications
The AS415e is engineered for use in permanent installations. It complements the AS460e or AS490e mid/high modules to provide full range performance in a flexible, modular, multi-enclosure format. Its trapezoid angles create the ideal splay for arrays of two AS460e's. Includes comprehensive 3/8-16 mounting points.

Size
Small/Medium

Description
A 2-way mid/high system in a trapezoidal enclosure. Includes a horn-loaded 10 in MF cone with Radial Phase Plug™ and a 1.4 in exit/2.5 in voice coil HF neodymium compression driver on a 60° x 45° constant directivity horn.
Applications
The AS460e is engineered for use in permanent installations. It provides the mid/high performance capabilities of the 60°(H) ASe Series systems in a separate mid/high module. It can be used as a stand-alone system for speech-only applications or, together with an AS415e, AS422e, or AS625e LF module, provide full range performance in a flexible, modular, multi-enclosure format. Includes comprehensive 3/8-16 mounting points.

Horizontally formatted 3-way full-range system
EAW patented Radial Phase Plug™ technology
Neodymium magnet HF compression driver with 2.5-in voice coil
Horn-loaded MF/HF, 60° x 45° dispersion pattern
(2) 12 in LF Slant loaded array; 10 in MF; 1.4 in exit HF
Switchable powering configurations: bi-amplified (passive MF/HF) or tri-amplified
Digital signal processor required to achieve specified performance

General Application
Install

Size
Small/Medium

Description
A bi-amplified or tri-amplified 3-way full range system in a horizontally formatted enclosure. Includes (2) 12 in woofers, a horn-loaded 10 in MF cone and a 1.4 in exit/2.5 in voice coil neodymium HF compression driver on a 60° x 45° constant directivity horn.
Applications
The ASR660e is engineered for use in permanent installations where a low profile loudspeaker is desireable. Optimized subsections provide excellent full range frequency response in a medium format enclosure. Includes comprehensive 3/8-16 mounting points.

Horn-loaded long throw LF array module
(2) 15 in woofers
Works with KF853D MF/HF long throw array module
P (install) or R (touring) versions available

General Application
Touring
Install

Size
Large

Description
A dedicated high "Q" Virtual Array low frequency module. Includes (2) horn-loaded 15 in woofers in a trapezoidal enclosure.
Applications
The BH853F uses LF horn loading and enclosure venting for increased output and extended pattern control. Engineered to complement the KF853D mid/high Virtual Array module in permanent or portable long throw applications.

Description

The CP466 is a low cost, high-performance ceiling loudspeaker. Its unique design utilizes four 6-in low/mid frequency cone drivers arrayed around a medium format 60° x 60° degree HF horn. The HF horn is mated to a 1.4-in exit compression driver. This configuration centers the low and high frequency axes to provide the same type of point source performance as a traditional coaxial design. This also allows the use of a much larger HF horn and provides significantly improved HF pattern control to much lower frequencies than typical co-axial ceiling loudspeakers. The four low/mid drivers are arrayed to extend useful pattern control to below 400 Hz. Additionally, their smaller cone size provides far better reproduction of critical midrange frequencies without sacrificing output capabilities.

Applications

The CP466 is designed for use in a variety of ceiling mounted applications where pattern control, high-quality reproduction and higher outputs are required. These include convention and conference centers, ballrooms, arena fill, and large meeting rooms. The CP466 carries a six year warranty

Applications
The DC1 bi-amplified 3-way dance club system provides high output, high definition reinforcement for large-sized clubs. The DC1’s asymmetrical horns direct coverage down when the enclosures are mounted flush to a wall. The enclosure includes balance-optimized threaded mounting points. Like all EAW products, it can be special ordered in virtually any color to match a specific décor.

Description
The DCT1 is engineered for use in permanent installations. The system mounts four 1.33 in exit compression tweeters in an inverted pyramid enclosure. The driver/phase plug assemblies are engineered to minimize beaming of soundwaves with the smallest wavelengths, particularly in the horizontal plane.

Applications
The DCT1's inverted pyramid configuraton delivers optimized 360° horizontal high frequency dispersion when suspended directly over a dance floor. It provides very high levels of high frequency sound reinforcement for high energy dance clubs. Like all EAW products, it can be special ordered in virtually any color to match a specific décor.

Description
The DCT2 is engineered for use in permanent installations. The system mounts three 1.33 in exit compression tweeters in a wide-angled enclosure. The driver/phase plug assemblies are engineered to minimize beaming of soundwaves with the smallest wavelengths, particularly in the horizontal plane.

Applications
The DCT2's wide-angled configuraton delivers optimized 120° horizontal high frequency dispersion from a mounting location adjacent to or on a full-range system. It provides very high levels of high frequency sound reinforcement for high energy dance clubs. Like all EAW products, it can be special ordered in virtually any color to match a specific décor.

EAW’s new Digitally Steerable Array, or DSA™ Series, represents a radical step forward for small to mid-sized permanent installation applications. In essence, the DSA Series simplifies the KF900/PPST technology that permits digital steering and aiming of an array’s output and adapts it to applications where column loudspeakers would typically be specified.

Like a KF900 array, each driver in a DSA Series loudspeaker enjoys its own individual amplification and digital signal processing (DSP). Using EAW’s free DSA Pilot software program, users can vary the vertical coverage pattern from 15° to 120° as well as aim the coverage ±30°.

Unlike the KF900 system, however, all this power is housed in a compact, column speaker-type enclosure that requires no external amplification or processing. Users only need to connect AC power, audio signal, and network communications cables. DSA Pilot recognizes each loudspeaker connected to the network and allows users to control all of them from a single interface.

This complex, powerful technology has been years in the making, so a review of the engineering goals and design concepts will help the reader better understand the genesis of these amazing loudspeaker systems

Applications
The Close Coupled Power™ concept integrates amplification with the loudspeaker system to maximize performance, reliability and efficiency. Precisely matching the amplifier design to the specific system's driver/enclosure characteristics provides a substantial amount of headroom without compromising reliability. State-of-the-art protection systems - actuated by real-time current and voltage monitors - apply complex compressor/limters and soft clipping circuitry for virtually transparent protection of both the amplifier and the drivers, even when driven to the highest output levels.

Authorized service professionals can access many elements of the Close Coupled Power Module™ simply by removing the back panel. When necessary the CCPM™ can be removed as a self-contained unit.

The EP2 powered loudspeaker system optimizes performance and reliability for a wide range of portable and permanently installed sound reinforcement applications. The internal Close Coupled Power Module™ provides ample distortion-free amplification as well as sophisticated, transparent driver/amplifier protection circuitry and signal processing.

Applications
The Close Coupled Power™ concept integrates amplification with the loudspeaker system to maximize performance, reliability and efficiency. Precisely matching the amplifier design to the specific system's driver/enclosure characteristics provides a substantial amount of headroom without compromising reliability. State-of-the-art protection systems - actuated by real-time current and voltage monitors - apply complex compressor/limters and soft clipping circuitry for virtually transparent protection of both the amplifier and the drivers, even when driven to the highest output levels.

Authorized service professionals can access many elements of the Close Coupled Power Module™ simply by removing the back panel. When necessary the CCPM™ can be removed as a self-contained unit.

Entry-level access to truly professional loudspeaker systems
12 in woofer in optimally vented enclosure, 1 in HF on 90° horn
Handles, rubber footpads, threaded mounting points and pole mount cup standard
Works with FR250z subwoofer to create an instant PA

General Application
Portable
Install

Size
Small/Medium

Description
A 2-way passive full range system in a compact vented trapezoidal enclosure. It incorporates a 12 in woofer and a 1 in exit/2 in voice coil compression driver mounted to a 90° x 45° constant directivity horn. It comes with handles, rubber foot-pads, a pole mount cup, and three 3/8-16 mounting points. An internal passive crossover network uses complex asymmetrical filters to divide the signal and performs critical equalization functions.

Applications
The FR129z provides high output full range response in a versatile, compact system. It offers entry-level access to a high quality, truly professional loudspeaker system for musicians and DJ’s servicing small to medium venues. The FR129z is designed primarily for portable applications, but mounting points are provided for installation applications. The FR129z is optimized for use with the FR250z dual 15 in subwoofer system, which also serves as a pole mount base. In such a configuration, an optional 5 ft mounting pole positions the FR129z’s HF horn above the heads of audience members for optimum coverage.

Entry-level access to truly professional loudspeaker systems
True 3-way design offers superior vocal reproduction
15 in woofer, 6.5 in mid cone, 1 in HF on Wave Guide Plate™
Handles, threaded mounting points, rubber footpads and pole mount cup standard
Works with FR250z subwoofer to create an instant PA


General Application
Portable
Install

Size
Small/Medium

Description
A 3-way passive full range system in a compact vented trapezoidal enclosure. It incorporates a 15 in woofer, a 6.5 in midrange cone in a sealed subenclosure, and a 1 in exit/2 in voice coil compression driver mounted to a 100° conical Wave Guide Plate™. It comes with handles, rubber foot-pads, a pole mount cup, and three 3/8-16 mounting points. An internal passive crossover network uses complex asymmetrical filters to divide the signal and performs critical equalization functions.

The true 3-way design requires each transducer to operate only in its optimum passband for superior overall response. A dedicated midrange subsystem handles the majority of the vocal range, resulting in increased intelligibility and more natural sounding vocals.

Applications
The FR153z provides high output full range response in a versatile, compact system. It offers entry-level access to a high quality, truly professional 3-way loudspeaker system for musicians and DJ’s servicing small to medium venues. The FR153z is designed primarily for portable applications, but mounting points are provided for installation applications. The FR153z is optimized for use with the FR250z dual 15 in subwoofer system, which also serves as a pole mount base. In such a configuration, an optional 5 ft mounting pole positions the FR153z’s HF horn above the heads of audience members for optimum coverage

Size
Small/Medium

Description
A dedicated subwoofer system with (2) 15 in transducers in a compact vented rectangular enclosure. Physically reversing one woofer relative to the other helps to cancel the mechanical distortion inherent when large transducers are driven at high levels. It includes recessed handles and rubber feet. A pole receptacle allows the FR250z enclosure to double as a base for use with any pole-mountable full range system. Mounting points on the rear of the enclosure facilitate the installation of an optional caster kit. The Neutrik NL4 Speakon jacks use pin 2 for input to the sub and loop- through the pin 1 input.

Applications
The FR250z provides high output sub-bass response in a compact enclosure. It is intended primarily for portable applications, but it may readily be used in installations where budget and space is restricted. For increased stability, the pole mount receptacle extends to the bottom of the enclosure to leverage the system's entire weight. An appropriately configured MX250 processor will extend LF response while integrating the subwoofer with a full range system.

Size
Small

Description
A 2-way full range system in a compact asymmetrical trapezoidal enclosure. Available in LEFT (part #999477) or RIGHT (part # 999049) versions. Includes two 5.25 in woofers and a 1 in soft dome tweeter on a Wave Guide Plate™. Impedance is switchable: 4 ohms or 16 ohms.
Applications
The JF50S is engineered for exceptional performance in the nearfield from a compact enclosure. Transducers are magnetically shielded for use on either side of video monitors. Very effective as a fill/delay element in larger overall systems or for foreground/background music reproduction.

Size
Small

Description
A 2-way full range system (passive LF/HF crossover) in a compact vented trapezoidal enclosure. Includes two 6.5 in woofers and a 1 in exit compression driver on a Wave Guide Plate™.

Applications
The JF80 is engineered for exceptional performance in the nearfield from a compact enclosure. Surprisingly high output, exceptional fidelity. Very effective as a fill/delay element in larger overall systems or for foreground/background music reproduction.

Size
Small

Description
The JFX88 is a 2-way ultra-compact multi-use loudspeaker. Its multi-functional design adds considerably to its value as a full-range loudspeaker. Combining high output and natural reproduction, it is specifically outfitted to serve in a variety of both portable and permanent applications. The asymmetric enclosure provides typical angles needed for ceiling and wall mounting as well as for stage monitor operation. For permanent installation, enclosure hardware includes mounting points for an optional U-bracket and an Omnimount® Series 100 or similar bracket. A pole mount cup is provided for portable use. The JFX88 is particularly suitable as a nearfield main loudspeaker or as a fill/delay element in larger systems. Its wide angle projection makes audience coverage easy. While the JFX88 is well suited as is for many applications, the addition of a subwoofer expands its capbilities for more demanding applications such as for small houses of worship, theaters, and band PA.

Applications
Portable systems or permanent installations
Wall and ceiling mountings
Very low profile appearance
Main PA reinforcement in small spaces
Under balcony/stage lip/delay fill
A/V and/or surround sound installations
Voice & F/X reinforcement in themed attractions

Dual use main/monitor 2-way system
15 in LF/2 in exit HF on 90° conical Wave Guide Plate™
Integrated flytrack, suspension points and pole mount cup
Internal passive crossover/filter network
For portable use or permanent installation

Description
A 2-way full range system (passive LF/HF crossover) in a vented dual purpose (main/stage monitor) enclosure. Includes a 15 in woofer and a 2 in exit/3 in voice coil compression driver on a Wave Guide Plate™.

Applications
The LA215 integrates with other LA Series loudspeakers to build an expandable total system. Includes a stand mount cup for use as a small main and rubber footpads for use as a stage monitor. Handles and 3-position fly track with integrated mounting points are included.

3-way full range main channel system
(2) 15 in LF, vented/(2) 7 in MF, sealed
2 in exit HF on 90° x 70° Elliptic Conical WGP™
Integrated flytrack and suspension points
Switchable powering: full range passive or bi-amp (passive MF/HF)
For portable use or permanent installation
EAW processor required to achieve specified bi-amplified performance

Description
A 3-way full-range system in a vented trapezoidal enclosure. Includes (2) 15 in woofers, (2) 7 in midrange cones and a 2 in exit/3 in voice coil compression driver on an elliptic (90° x 70°) Wave Guide Plate™. Powering mode is switchable: passive or bi-amplified (passive MF/HF crossover).

Applications
The LA325 provides concert-level output in a versatile, portable enclosure. High definition nearfield response in small- to medium-sized venue live music applications. Includes handles and 3-position flytracks with integral mounting/suspension points. Optional casters. Six Year Warranty

Bent bass horn subwoofer
12 in heavy duty woofer
±3 dB 45 - 150 Hz
Peak output: 140 dB SPL
For portable use or permanent installation

Size
Small/Medium

Description
The LA400 uses bass horn technology that was developed for the KF940 SuperSub™. It loads a powerful 12 inch woofer on an expanding bass horn that is eight feet in length, and provides extremely high output sub bass response in a compact, portable enclosure. The efficiency provided by EAW's advanced horn-loading techniques permits the LA400 to extend overall system frequency to the lowest octaves.

The LA400 is designed to be easily transportable. The "towel bar" handle across the mouth of the horn and cut-away lower rear corner allows users to roll the LA400 onto its rear-mounted casters with a minimum of effort. Mounting the casters on the enclosure's rear lowers the system's center of gravity during transport for easier rolling and more stable packing. A stout grille protects the drivers from objects that might fall into the horn when on its back.

Applications
The LA400 defies conventional wisdom, which states that an 18 inch woofer is required to drive a bass horn. 18 inch woofers simply do not have the rigidity required to drive the high acoustic impedance present in a horn throat. As a result, traditional 18 inch bass bins get loud, but only produce one note very well. The LA400 in contrast uses a proprietary heavy duty 12 inch woofer. The woofer has the motor structure of a traditional 18 inch device, and its cone is reinforced to be a better engine for compact horn-loading. This woofer is then loaded onto a properly designed bass horn which matches path length to cone area and maximizes driver efficiency. The result is tight, punchy sub bass response that not only will shake your foundation, but is articulate and musical as well.

The horns of multiple enclosures couple acoustically to create a single, larger horn that increases output and provides directivity to very low frequencies. Factory-recommended digital processor settings will enhance LF performance even more. The LA400 is engineered to work as a companion to LA Series full range systems, as well as other high-output compact loudspeaker systems. Laid on its side the LA400 is only 21 inches high, which also makes it very effective in clubs and theatres where subs must be intalled under a low stage.

Applications
The LA460 applies Virtual Array Technology to small venue performance in both portable applications and permanent installations. With EAW's mathematically correct midrange flare, pattern control is maximized throughout the vocal region providing exceptional speech intelligibility in a compact enclosure.

Applications
Like the classic column speakers of the 1950s and 60's, the LS432 was designed to solve speech-only installation problems in highly reverberant spaces with low ceilings and hard floors. These might include small houses of worship, transportation hubs, and libraries or other civic spaces. The 26 in tall, 6.25 in wide enclosure fits nicely on architectural columns and can be custom painted to blend in with any decor. The enclosure includes a comprehensive system of 1/4-20 threaded mounting points for easy installation

Applications
Like the classic column speakers of the 1950s and 60's, the LS Series was designed to solve speech-only installation problems in highly reverberant spaces with low ceilings and hard floors. These might include small houses of worship, transportation hubs, and libraries or other civic spaces. The 44 in tall, 6.25 in wide enclosure fits nicely on architectural columns and can be custom painted to blend in with any decor. The enclosure includes a comprehensive system of (20)1/4 in threaded mounting points for easy installation

Applications
The MK2126e is designed to provide maximum flexibility across the spectrum of permanent intallation applications and is equally effective in clusters or in distributed designs. Its large-format HF horn maintains directivity throughout it's passband. The crossover point is selected to match the horn's directivity to that of the woofer, creating a seamless, consistent beamwidth to ensure even coverage thoughout the listening area. The user-rotatable HF horn allows installers to mount the enclosure in a horizontal or vertical configuration with the beamwidth oriented as required.

Applications
The MQ1364 mid/high module works with the MQ1312 triple 12 in low frequency module to create arrays for use in a wide variety of permanently installed applications. The most common array configuration is two MQ1364’s separated by a single MQ1312. In such an array, a certain amount of splay must be provided to achieve optimal coverage. Rigging systems currently available allow users up to 10° of overlap between the mid/high enclosures. All MQ Series enclosures feature a comprehensive system of 3/8-16 threaded mounting points for maximum flexibility when suspending arrays overhead

Applications
The MQ Series comprises matched sets of mid/high and low frequency enclosures with complementary dimensions. This facilitates creating attractive arrays that provide high definition sound within tightly controlled coverage areas. The MQ2315 is designed to work with a complementary MQ2300 Series mid/high loudspeaker to create a full range audio system. The enclosure is vertically configured for arraying in horizontal rows. Horizontal arrays are typically used in venues where the array must address wide, fan-shaped audiences.

The most common array configuration is two MQ2364e's separated by a single MQ2315. In such an array, the MQ2364e's should be splayed 25° to either side of the MQ2315, netting a splay angle of 50° between mid/high modules. When arraying two MQ2394e's separated by a single MQ2315, all enclosures should be tight-packed to achieve optimal coverage. This configuration will net a splay angle of 80° between mid/high modules. All splay angles reference the center line of the enclosures.

Dedicated horn loaded MF/HF array module
Narrowest beamwidth in MQ Series: 45° H x 30° V
Vertically configured to create horizontal arrays
For permanent installation only
Digital signal processor required for specified performance

General Application
Install

Applications
The MQ2343D employs a no-compromise high “Q” design where the mid and high frequency horns are truly large enough to provide optimal pattern control throughout each passband. The MQ2343D has been specifically designed to work with the horn-loaded BH2312 LF loudspeaker to create a full-range audio system. It may also be used with the MQ2315, MQ2412, and MQTD415 LF loudspeakers, or without a LF complement for voice-only applications. Dual HF components produce greater output than comparably-sized MQ2300 Series products for long throw applications.

Applications
The MQ Series comprises matched sets of mid/high and low frequency enclosures with complementary dimensions. This facilitates creating attractive arrays that provide high definition sound within tightly controlled coverage areas. The MQ2412 is designed to work with a complementary MQ2300 Series mid/high loudspeaker to create a full range audio system. The enclosure is vertically configured for arraying in horizontal rows. Horizontal arrays are typically used in venues where the array must address wide, fan-shaped audiences.

The most common array configuration is two MQ2364e’s separated by a single MQ2412. In such an array, the MQ2364e’s should be splayed 25° to either side of the MQ2412, netting a splay angle of 50° between mid/high modules. When arraying two MQ2394e’s separated by a single MQ2412, all enclosures should be tight-packed to achieve optimal coverage. This configuration will net a splay angle of 80° between mid/high modules. All splay angles reference the center line of the enclosures

Applications
The MQM1215 adapts the original MQ Series approach for use in somewhat smaller enclosures. Enclosure dimensions are significantly reduced without sacrificing overall performance. The MQM Series comprises matched sets of mid/high and low frequency enclosures with complementary dimensions. This facilitates creating attractive arrays that provide high definition sound within tightly controlled coverage areas

Applications
The MQM1394e adapts the original MQ Series approach for use in somewhat smaller enclosures. Enclosure dimensions are significantly reduced without sacrificing overall performance. The MQM Series comprises matched sets of mid/high and low frequency enclosures with complementary dimensions. This facilitates creating attractive arrays that provide high definition sound within tightly controlled coverage areas.

Applications
The MQTD415 is a powerful tool when LF directivity is required. It harnesses well known interference effects to create a directional low frequency system without enormous horns or baffles. It is designed to work with a complementary MQ2300 Series mid/high loudspeaker to create a full range audio system. The enclosure is vertically configured for arraying in horizontal rows. Horizontal arrays are typically used in venues such as houses of worship, where the array must address wide, fan-shaped audiences.

Applications
The MQTD812 is a powerful tool when LF directivity is required. It harnesses well known interference effects to create a directional low frequency system without enormous horns or baffles. It is designed to work with a complementary MQ1300 Series mid/high loudspeaker to create a full range audio system. The enclosure is vertically configured for arraying in horizontal rows. Horizontal arrays are typically used in venues such as houses of worship, where the array must address wide, fan-shaped audiences

Applications
The MQV1366e combines the MQ Series LF/MF/HF components into a full-range, single-enclosure loudspeaker. It is horizontally configured for arraying in vertical columns. This arrangement is typically used in sports arenas and other venues where the array must address wide, vertical audience angles. The MF/HF horns in the MQV1366e feature a rigid but well-damped construction using wood veneer backed by structural foam. A no-compromise design means the mid and high frequency horns are truly large enough to provide optimal pattern control throughout each passband.

Applications
The MQV2364e combines the MQ Series LF/MF/HF components into a full range, single-enclosure loudspeaker. It is horizontally configured for arraying in vertical columns. This arrangement is typically used in sports aren