Teradek 10-0757 Bond 757 HEVC USB + Cube 755 + MPEG-TS

Vendor: Teradek
Teradek 10-0757 Bond 757 HEVC USB + Cube 755 + MPEG-TS The Teradek 10-0757, also known as Bond 318 and Cube 755 Package, is professionally designed including a Bond 318 Expansion Module, a Cube...
$4,990.00
Title

Teradek 10-0757 Bond 757 HEVC USB + Cube 755 + MPEG-TS

The Teradek 10-0757, also known as Bond 318 and Cube 755 Package, is professionally designed including a Bond 318 Expansion Module, a Cube 755 Encoder, and an MPEG-TS license. The bond module comes supporting up to five USB devices, Ethernet, and Wi-Fi. It also capable of supporting up to four iOS devices and is compatible for use along with Cube 605/655, 715/755, and 805/855.

The Cube 755 encoder comes along with one 3G/HD/SD-SDI (75 Ohm BNC) input and one HDMI type A receptacle input. It is possible to be mounted horizontally or vertically along with 1/4"-20 mounting holes.

Teradek Cube 755 HEVC/H.264 HD Encoder

Set up a Teradek Cube 755 HEVC/H.264 HD Encoder and output video intended for use in live monitoring on a local area network or stream to a remote destination over a cellular network. SDI and HDMI inputs is capabel to accept up to 1080p60 resolution video and any resolution that is accepted by either input is possible to be streamed live over hardwired Ethernet, Wi-Fi, or USB (for connecting a cellular modem), and/or recorded to an SD card at a data rate of up to 30 Mbps. The lightweight chassis itself is carefully built out of robust aluminum and it is possible to be secured atop most cameras with the use of the included shoe mount. One side comes featuring an OLED panel designed for displaying device status and menus and a joystick for navigation.

HEVC and H.264 Encoding
HEVC, or H.265 provides an encoding efficiency improvement over the older H.264 format. All other things being equal an H.265 encoding will be of higher fidelity than H.264. H.264 encoding is still useful, and included to ensure compatibility with legacy hardware.

Monitoring
If connected to a local area network via Wi-Fi or Ethernet, the Cube 755 can stream the incoming video signal to up to 6 mobile devices running Android with the VLC app or iOS with the TeraView or VUER apps. Set your crew up with compatible devices and give them real-time wireless camera feeds without breaking the bank.

LUT Support
Import a 33-point 1D or 3D LUT to apply to the video being encoded by the Cube 755 to give your encoded video a finished look. Later, you can go back to the camera originals recorded with the log or flat profile and color grade them, but on-set your director, client, and crew will appreciate a more true-to-life image than the one being recorded. Another option is to use the Pomfort LiveGrade integration, using LiveGrade to manually configure a grade to apply to the encoded footage.

Features

  • Real-time HEVC H.264, 1080p encoding up to 60 fps
  • SDI and HDMI inputs
  • Adaptive bit rate encoding at up to 30 Mbps
  • Support for 33-point 3D LUTs and Pomfort LiveGrade integration
  • Support for USB cellular modems
  • SD card slot for recording
  • Test pattern generator with custom test pattern loading
  • Monitoring on up to six iOS and/or Android devices simultaneously
  • Aluminum housing, OLED display, and joystick navigation buttons

Teradek Bond USB Cellular Expansion Module

The Bond USB Cellular Expansion Module from Teradek combines several 3G/4G/LTE modems into a single bandwidth pipeline so you can stream live and in high definition from a cellular signal area. It connects to any Cube 600, 700, or 800 series through a pogo pin connector and offers up to four additional modem connections via USB (five total with Cube's one USB port), including Teradek Node high performance LTE radios. A built-in, 5 minute Li-ion battery offers continuous power during battery swaps so your transmission is not disrupted.

The Node, a high-performance 3G/4G/LTE modem, connects to the Bond module via USB and supports major LTE data bands, allowing you to use any SIM card for your region. When you stream over bonded network connections with the Cube and Bond expansion module, a Core server running demuxing software is required to turn the data back into a video format. The Core expands the Bond module's capabilities, including real-time transcoding, archiving, remote management and configuration, and multi-platform delivery.

  • Stream over multiple 3G/4G/LTE cellular networks
  • Supports up to four USB modems
  • Integrates with Cube 600, 700, and 800 Series (605/655, 715/755,805/855)
  • Built-in Li-ion battery
  • Low power consumption
  • Impact resistant aluminum chassis
  • Supports up to four iOS devices
  • Wi-Fi and Ethernet (built into Cube)

Teradek MPEG Transport Stream License for Cube Encoders

The Teradek MPEG Transport Stream License for Cube Encoders allows you to create an MPEG-TS over IP (TCP or UDP) video stream that is compatible with television broadcast equipment and IPTV set-top boxes. A license activation key will be e-mailed to you from Teradek after purchase.

Teradek Cube 755 HEVC/H.264 HD Encoder Specs

Video Input 1 x 3G/HD/SD-SDI BNC (75 Ohms)
1 x HDMI Type A
Bonding TeraLink
Input Resolutions 1080p 60/59.94/50/30/29.97/25/24/23.98
1080i 60/59.94/50
1080PsF 30/29/25/24/23
576i
480i
720p 60/59.94/50
576p (HDMI input only)
480p (HDMI input only)
NTSC
PAL
Video Compression H.264: Baseline, Main, and High Profile
H.265: Baseline, Main, and High Profile
Supported Video Bit Rates 250 kbps to 30 Mbps
Test Pattern Generator Support Supports custom test pattern
Format Conversion Built-in video scaler and deinterlacer
LUT Support CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Network Protocols TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
Supported Video Transport Protocols RTMP
RTP, RTSP, RTSP over HTTP
MPEG-TS (requires optional paid license)
Wi-Fi 2.4/5GHz 802.11 ac/a/b/g/n MiMo
Encryption: 802.1x, 802,11i, WPA2, WPA, and WEP 64/128 TKIP 128bit AES
Remote Control Teradek Core
Audio Compression AAC-LC, MPEG Layer 2
Audio Input Embedded audio input
Analog line or mic in, adjustable gain
Audio Output Headphone output
Configuration WebUI and OLED display with joystick navigation buttons
Storage SD card slot
USB Interface Powered USB 2.0 host port
Ethernet 10/100/1000BASE-T Gigabit
Modem Support USB 3G/4G modem support (check Teradek website for updated list of compatible modems)
Mount Type 1/4"-20 threaded mounting holes allow for horizontal or vertical mounting
Power Input 2-pin connector
Power Consumption 8 W (max)
Auxiliary Power Input 6-28 VDC
Dimensions 4.75 x 3 x 1.1 / 12 x 7.6 x 2.8 cm
Weight 11.6 oz / 329 g
Packaging Info
Package Weight 2.25 lb
Box Dimensions (LxWxH) 6.6 x 6.6 x 4.8"

 

Teradek Bond USB Cellular Expansion Module Specs

Interfaces Controlled through Cube
4x powered USB 2.0 host port
Power Consumption Nominal: 0.5 W, up to 5 W per USB device
Power supplied by Cube
Internal Li-ion battery
Temperature Operating: 14 to 122°F (-10 to 50°C)
Storage: -40 to 194°F (-40 to 90°C)
Humidity Operating: 5% to 95% (non-condensing)
Storage: Maximum 90%
Construction Milled aluminum (chassis), regulation-compliant PCB
Dimensions 1 x 3 x 4.7" (24 x 77 x 120 mm)
Weight 7.9 oz (224 g)