JBL VRX918SP Powered 18" flying subwoofer

Vendor: JBL
Description JBL VRX918SP Powered 18" flying subwoofer 18 in. High Power Powered Flying Subwoofer The JBL VRX918SP is a suspendable, powered subwoofer system designed that contains a patented Differential Drive®, 2268FF neodymium magnet, vented enclosure, 18" woofer in a front-loaded. The JBL VRX918SP...
$2,479.00 $3,590.00
Title

JBL VRX918SP Powered 18" flying subwoofer

18 in. High Power Powered Flying Subwoofer

The JBL VRX918SP is a suspendable, powered subwoofer system designed that contains a patented Differential Drive®, 2268FF neodymium magnet, vented enclosure, 18" woofer in a front-loaded. The JBL VRX918SP was designed specifically for use in arrays with the VRX-AF Array Frame and the VRX932LAP Line Array speaker. In addition the JBL VRX918SP may also be used in arrays that consist entirely of VRX918SP subwoofers.

FEATURES
  • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
  • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and
    light weight.
  • Integral rigging hardware for simple connection of enclosures and optional array frame.
  • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
  • Large port area for reduced distortion.
Power Rating 1500 Watts Peak
LF: Dual-Bridged Technology™, Class D
Frequency Range 31 Hz – 220 Hz
Dimensions
(H x W x D)
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in)
Frequency Response 34 Hz – 220 Hz
Maximum Peak Output 126 dB SPL at 1m
Bandpass Nominal Impedance LF: 2 x 2 ohms
LF Driver 1 x JBL 2268FF 457 mm (18 in) dual voice coil
Differential Drive® woofer with neodymium-magnet
Audio Input Connector XLR with loop through
User Controls Input Attenuator (0-16 dB)
Selectable 80 Hz or 120 Hz Low Pass
80 Hz High-Pass enable/disable for XLR loop thru.
Signal Processing DSP based, resident in Input Module
System Management DSP based limiters for mechanical and thermal protection
AC Power Operating Range 90-132 VAC or 216-264 VAC, 50/60Hz
AC Line Voltage User selectable: 120V/240V (-15%, +10%)
AC Input Connector Neutrik PowerCon (NAC 3MPA)
AC Loop Through Connector Neutrik PowerCon (NAC 3MPB)
AC Current Requirements 6A per system at 120V, 3A per system at 240V
Enclosure 18 mm birch plywood.
Suspension / Mounting Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
Finish Black DuraFlex™ finish
Grille Powder coated, black, 16-gauge perforated steel with
acoustically transparent foam
Net Weight 38.5 kg (85 lb)
Optional Accessories VRX-AF array frame
SRX718S-CVR: Pull-over padded cover (works with WK-4S)
SS4-BK adjustable satellite speaker pole WK-4S Caster kit