Tascam CG-1800 MASTER CLOCK GENERATOR

Vendor: Tascam
Description Tascam CG-1800 MASTER CLOCK GENERATOR The CG-1800 from Tascam is specifically designed for use in small to large-scale video/audio synchronization systems. An OCXO (oven-controlled crystal oscillator) is used for its high precision...
$2,599.00 $2,699.99
Title

Tascam CG-1800 MASTER CLOCK GENERATOR

The CG-1800 from Tascam is specifically designed for use in small to large-scale video/audio synchronization systems. An OCXO (oven-controlled crystal oscillator) is used for its high precision and because it's not being affected by the temperature of the environment. It comes with a clock frequency precision of 0.01 ppm the unit capable of delivering a high-precision synchronization along with a frequency stability of +/-0.005 ppm or less per day.

External clock jitter is reduced with the use of an original circuit design that is incorporating a high-performance video clock generator that is engineered along with a FPGA and a PLL (phase-locked loop) circuit that comes with a discrete filter. This is enabling a stable clock signal to be provided to the video/word outputs, which is totally improves system stability.

In addition to twelve Wordclock outputs and four video outputs, the digital outputs include two AES3/AES11 and two S/PDIF outputs, making this unit useful for large-scale audio/video synchronization systems and a wide variety of other applications. Of the twelve Wordclock outputs, two also support x2 Fs, x4 Fs and 256 Fs output, enabling them to be used in systems with Pro Tools and other DAW software.

The unit comes featuring a multiple functions capable of supporting maintenance and the identification of issues if problems occur, this is allowing the device for providing troubleshooting support. Additionally, a logging function is enabling the issues to be listed, and saved to a CSV file format on a USB flash drive. A self-correction function is designed for allowing the users for conducting the maintenance with the use of an external signal input and simple operations.

Amphenol BNC connectors on the chassis use nuts for coupling for extra durability, that comes along with a single circuit board used for each connector. This is providing with a good resistance to the twisting and pulling of cables, and the suppression of interference between connectors.

  • Internal clock uses a high-precision OCXO (oven-controlled crystal oscillator) that is not influenced by the temperature of the environment
  • External input connector that supports 10 MHz, allowing creation of systems with even higher precision
  • Glitch-free relocking circuit prevents noise and skipping during clock dropouts and recovery
  • Numerous output connectors, including twelve Wordclock outputs, enabling the use in large-scale audio synchronization systems
  • Supports input and output of a variety of video signal formats, including NTSC, PAL and HD Tri-level
  • AES3 and AES11 signals can also be used for external master clock input sources
  • Analyzer function that can measure output device termination
  • Optimal levels can be provided to other devices by adjusting Wordclock output levels
  • Self-calibration function using an external oscillator (Atomic/GPS 10MHz, GPS PPS) (requires a separate PPS-output 10 MHz oscillator with a built-in GPS antenna)
  • Wordclock performance up to 192 kHz
  • 0.1% pull-up/down for 24F (Film) and 29.97F (NTSC), and 4% pull-up/down for 24F (Film) and 25F (PAL)
  • Up to four system settings can be saved to buttons for recall, and saved settings can be imported and exported via USB
  • Durable Amphenol manufactured nut-coupling BNC connectors
  • Independent circuit boards for each connector prevents contact failures due to twisting
  • Panel-lock switch can be used to prevent inadvertent changes to unit operation
  • 128 x 64-pixel organic EL display with a wide viewing angle
  • Firmware updates possible using the USB port
  • 1U rackmount
  • RoHS-compliant
Video Input Connector
BNC
Input Level
0.5 Vp-p to 2.0 Vp-p
Input Impedance
75 ohm (ON/OFF selectable by menu)
Input Signal
SD video black burst: NTSC (29.97), NTSC B/W (30), PAL (25)
HD Video Tri-Level
720p: 50, 59.97, 60
1080p: 23.976, 24, 25, 29.97, 30, 59.94, 60
1080i/pfs: 23.976, 24, 25, 29.97, 30
Allowable Frequency Deviation: +/-10 ppm
Wordclock Input Connector
BNC
Input Level
0.5 Vp-p to 5.0 Vp-p
Input Impedance
75/50 ohm (75/50/OFF selectable by menu)
Supported Frequencies
Wordclock: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz
ATOM: 10.0 MHz
GPS: 10.0 MHz
Allowable Frequency Deviation: +/-50 ppm
AES3/11 Input Connector
XLR-3-31(1:GND, 2:HOT, 3:COLD)
Input Level
0.2Vp-p to 10Vp-p
Input Impedance
110 ohm
Format
AES11-2003, AES3-2003, IEC60958-4
Supported Frequencies
Wordclock: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz
Allowable Frequency Deviation: +/-50 ppm
Calibration Connector
BNC
Input Level
0.5 Vp-p to 5.0 Vp-p
Input Impedance
50 ohm (ON/OFF selectable by menu)
Supported Frequencies
ATOM: 10.0 MHz
GPS: 10.0 MHz
Video Output Connector
BNC x 4
Output Level
1.3 Vp-p
Output Impedance
75 ohm
Output Signal
SD video black burst: NTSC (29.97), NTSC B/W (30), PAL (25)
HD Video Tri-Level
720p: 50, 59.97, 60
1080p: 23.976, 24, 25, 29.97, 30, 59.94, 60
1080i/pfs: 23.976, 24, 25, 29.97, 30
Wordclock Output Connector
BNC × 12
Output Level
1.0 Vp-p to 3.5 Vp-p (adjustable in 0.5 V steps by menu)
Output Impedance
75 ohm
Supported Frequencies
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
1/4 x Fs, 1/2 x Fs, 1 x Fs, 2 x Fs, 4 x Fs, 256 x Fs (only outputs 11-12)
AES3/11 Output Connector
XLR-3-31 (1:GND, 2:HOT, 3:COLD) ×2
Output Level
2.5 Vp-p
Output Impedance
110 ohm
Format
AES11-2003, AES3-2003, IEC60958-4
Supported Frequencies
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
S/PDIF Output Connector
RCA coaxial x 2
Output Level
0.5 Vp-p
Output Impedance
75 ohm
Format
IEC60958-3
USB Connector
4-pin type B
Protocol
USB2.0 High Speed (480 Mbps)
Power Supply Rating
DC 5.0 V, 0.2 A
Internal Oscillator Performance Type
OCXO
Frequency Accuracy
+/-0.01 ppm (factory default value)
Frequency Stability
+/-0.005 ppm / day
Operating Temperature 32 to 104˚F (0 to 40˚C)
Power Requirements 100~240 VAC, 50/60 Hz
Power Consumption: 10 W
Dimensions (WxDxH) 19.00 x 12.20 x 1.75" (483 × 310 × 45 mm)
Weight 7.1 lb (3.2 kg)