Denon Professional DN-200AZB, Mini Power Amp w/Bluetooth Receiver

Vendor: Denon Professional
Descriptions Denon Professional DN-200AZB, Mini Power Amp w/Bluetooth Receiver The Denon Professional DN-200AZB is built to be best friend of audio contractors. The Denon Professional DN-200AZB has a specialty of solving audio challenges that is easily and...
$80.00
Title

Denon Professional DN-200AZB, Mini Power Amp w/Bluetooth Receiver

The Denon Professional DN-200AZB is built to be best friend of audio contractors. The Denon Professional DN-200AZB has a specialty of solving audio challenges that is easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Also, the Denon Professional DN-200AZB is very super easy to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.

In addition, the Denon Professional DN-200AZB also has a compact Bluetooth audio receiver with a built-in 20W RMS, 4-ohm, 70/100V Class D amplifier. It allows you to add an amp with wireless stereo Bluetooth audio reception to any professional audio system. When you start to pair your Bluetooth Device to Denon Professional DN-200AZB, you can send your device audio signal to your loudspeakers, powered by the Denon Professional DN-200AZB.

Denon Professional DN-200AZB Main Features

  • Bluetooth level control
  • 4 ohm, 70/100V, 20W RMS Amplifier
  • Euroblock speaker output
  • Euroblock line input
  • Utilizes Bluetooth CSR 4.0

Amplifier
Output: 70V/100V/4Ω, 20W RMS, Class D design
Frequency Response: 50 Hz – 23 KHz
Signal-to-Noise Ratio: 90 dB
THD: < 0.1%
Input Impedance: 10 KΩ

Bluetooth Specification
Version: CSR 4.0
Maximum Transmission Power: Class 2, 4 dBm
Transmission Frequency: 2.4 GHz – 2.480 GHz
Transmission Range: Up to 100 feet / 30.5 meters
Receiver Sensitivity: -80 dBm @ 0.1% BER
Supported Profiles: AVCTP 1.0, AVRCP 1.0, GAVDP 1.2, AVDTP 1.0, A2DP 1.2, Hands-Free Profile (HFP) 1.5, Headset Profile (HSP) 1.1
Supported Codec: SBC, MP3, AAC, aptX

Inputs
1 x 3-pin Euroblock input (R, G, L), up to 16 AWG

Outputs
1 x 4-pin Euroblock output (Common, 4 Ω, 70 V, 100 V), up to 16 AWG
1 x power adapter input

General
Power: 15V DC, 2.5 A, center-positive (power adapter included)
Dimensions (W x D x H): 6.4” x 6.0” x 1.9” (163 mm x 153 mm x 48 mm)
Weight: 3.1 lbs. (1.4 kg)