Crown XLC2500 2x500W Cinema Amplifier w/o DSP

Vendor: Crown
Description Crown XLC2500 2x500W Cinema Amplifier w/o DSP The Crown XLC2500 is a Two-channel, 500W @ 4Ω Power Amplifier designed to incorporate the proprietary DriveCore™ Technology by Crown, which is capable of reducing the amplifiers’ size...
$775.89
Title

Crown XLC2500 2x500W Cinema Amplifier w/o DSP

The Crown XLC2500 is a Two-channel, 500W @ 4Ω Power Amplifier designed to incorporate the proprietary DriveCore™ Technology by Crown, which is capable of reducing the amplifiers’ size significantly, and at the same time to yield much more energy efficient operation, yet not affecting its performance. The XLC2500 is designed as a cost-effective, compact, and powerful to provide ease of installation, unwavering reliability and outstanding sound quality inherent in every Crown product. This amplifier is affordable, yet powerful options for both the install and cinema markets.

Power Matrix

Features

  • Two models of 500W (XLC2500) and 800W (XLC2800) per channel at 4-ohms
  • XLC Amplifiers are compatible with CXM2000 for monitor, fault detection and crossover functions
  • XLC Amplifiers are compatible with Crown Monitor System DSi-8M for monitor function
  • Power for 2-ohm, 4-ohm and 8-ohm outputs, supporting stereo and bridge outputs
  • Support parallel connection of cinema surround speaker
  • Indicators provide accurate diagnostics: Power, Signal, Clip and Fault
  • Volume control on rear panel of amplifiers
  • High performance, light weight
  • DriveCore  based amplifier – weighs less than 14lbs (6 kgs)

Some important features for install applications:

  • Minimal front panel control; block connectors and controls on back of amplifiers
  • High performance lightweight DriveCore based amplifier for audiophile quality and extremely high reliability
  • Configurable input operation for stereo and parallel and bridge modes
  • Configurable output operation for stereo and bridge modes
AC Line Voltage and Frequency Configurations Available (+/- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz
Voltage Gain 35
Sensitivity 1.4V (for full rated power at 4 ohms)
Signal to Noise Ratio (ref. rated power, 8 ohms, 1 kHz) > 103 dB
THD <0.5%
Damping Factor (8 ohms, 10 Hz to 400 Hz) >200
Intermodulation Distortion (from full rated output to -30 dB) <0.3%
Frequency Response (at 1W, 20 Hz - 20 kHz) 0 dB
Crosstalk >85 dB (below rated 8 ohms power, at 1 kHz); >55 dB (below rated 8 ohms power, at 20 kHz)
Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced
Load Impedance 2~8 ohms per channel in Stereo; 4~8 ohms in Bridge
Dimensions 19" x 3.5" x 8" (48.3cm x 8.9cm x 20.6cm)
Weight 8.3 lbs (3.75 kg)
Shipping Weight 10.7 lbs (4.85 kg)
IEC Power Connector 15A