← Previous Product Next Product →

Audio Technica ATW-1101/L, System 10 Digital Wireless

Name: Audio Technica ATW-1101/L, System 10 Digital Wireless
Brand: Audio Technica
SKU: ATW-1101/L
Price: 349.95 USD
Availability: InStock

Vendor: Audio Technica

Descriptions Audio Technica ATW-1101/L, System 10 Digital Wireless The Audio Technica ATW-1101/L is a system 10 from Audio Technica and a digital wireless headworn microphone solution for lecturers and similar applications that require...

$349.95

Default Title

Subtotal:

Quantity

Descriptions

Audio Technica ATW-1101/L, System 10 Digital Wireless

The Audio Technica ATW-1101/L is a system 10 from Audio Technica and a digital wireless headworn microphone solution for lecturers and similar applications that require articulate vocal reproduction. Audio Technica ATW-1101/L set includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the beige PRO 92cW-TH headworn microphone. Audio Technica ATW-1101/L uses a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Audio Technica ATW-1101/L built for expandability so you can use up to eight systems simultaneously.

Product Features of the Audio Technica ATW-1101/L

Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems
Windscreen to help prevent pops from wind and breath
Microphone features a rugged build for withstanding everyday wear and tear
Includes clip for securing the lavalier to your clothing
Level controls on transmitter and receiver
Pair indicator illuminates on receiver when synced with transmitter
AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping

Specifications

System Specifications
Operating Frequencies	2.4 GHz ISM band
Dynamic Range	>109 dB (A-weighted), typical
Total Harmonic Distortion	<0.05% typical
Operating Range	30 m (100') typical
Operating Temperature Range	0 to +40° C (32 to 104° F)
Frequency Response	20 Hz to 20 kHz
Audio Sampling	24 bit, 48 kHz
Receiver
Receiving System	Diversity (frequency/time/space)
Output Connections	1x XLR, balanced 1x 1/4" (6.3 mm), unbalanced
Maximum Output Level	Balanced: 0 dBV Unbalanced: +6 dBV
Power Supply	100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive, switched mode external power supply
Dimensions	7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm)
Weight	10.2 oz (290 g)
Transmitter
RF Output Power	10 mW
Spurious Emission	Following federal and national regulations
Input Connections	1x 4-pin locking connector Wiring: Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V
Batteries	2x 1.5V AA (not included)
Battery Life	>7 hours (alkaline)
Dimensions	2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm)
Weight	3.5 oz (100 g), without batteries
Microphone
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Omnidirectional
Frequency Response	30 Hz - 20 kHz
Low Frequency Roll-Off	80 Hz, 18 dB/octave
Open Circuit Sensitivity	-37 dB (14.1 mV) re 1V at 1 Pa
Impedance	200 ohms
Maximum Input Sound Level	135 dB SPL, 1 kHz at 1% T.H
Dynamic Range	108 dB, 1 kHz at Max SPL (typical)
Signal-to-Noise Ratio	67 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 2 mA (typical)
Switch	Flat, roll-off
Connector	Locking 4-Pin HRS connector
Cable Length	55" (1.4 m)
Dimensions	0.62 x 0.33 x 0.19" (15.8 x 8.3 x 5.0 mm)
Weight	0.05 oz (1.3 g)