Audio Technica AT4041SP, 40 Series Studio Mic Pack

Vendor: Audio Technica
Descriptions Audio Technica AT4041SP, 40 Series Studio Mic Pack Audio Technica AT4041SP studio packs offers a two AT4041 studio condenser microphones. And this Audio Technica AT4041SP is engineered to meet the most critical acoustic...
$499.00
Title

Audio Technica AT4041SP, 40 Series Studio Mic Pack

Audio Technica AT4041SP studio packs offers a two AT4041 studio condenser microphones. And this Audio Technica AT4041SP is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. Also, Audio Technica AT4041SP has a features of smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for every high SPL-handling capability. The element Audio Technica AT4041SP has also a back plate that holds a fixed charge and has been aged to provide energy stabilization. Another thing is Audio Technica AT4041SP is the surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Product Highlights of the Audio Technica AT4041SP

    • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
    • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
    • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
    • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
    • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
    • Switchable hi-pass filter and rugged turned-brass microphone housing
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
SWITCH Flat, roll-off
WEIGHT 4.2 oz (120 g)
DIMENSIONS 6.28" (159.5 mm) long, 
0.83" (21.0 mm) body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE  S1