Chauvet VIP Driver front view
Chauvet VIP Driver rear view
Chauvet VIP Driver front and side view

Chauvet VIP Driver

Includes : Power Cord, USB Cable, DVI Cable, 9-pin Serial (M-to-F)

Product Highlights

  • Needed for panel calibration and video conversion to CHAUVET ® MVP™ and PVP™ video panels
  • CHAUVET® LED Studio software connects straight to the VIP™ Driver through USB for patching and panel setup
  • Works with either DVI or HDMI input 2 Neutrik® etherCON® outputs (655,360 LEDs capacity each)
  • Capable of up to 1,310,720 LEDs and is scalable to link up to 4 units in a one system (5,242,880 LEDs total capacity)
  • Needed to convert video signal in PVP systems

Sale Price $999.99
Retail Price $1,339.99
You save $340.00

ADD TO CART

 Guaranteed Lowest Price
100% Satisfaction Guarantee
Free Freight on most products
Lifetime Technical Support
Easy Financing
Our Low Price Guarantee

Chauvet VIP Driver

The Chauvet VIP Driver is the very center of the VIP video display system, serving as the interface between any DVI or HDMI video source and all MVP or PVP and C6 video panels through the CHAUVET LED Studio software (freely included). It is rackmountable and features two signal outputs, each driving up to 655,360 LEDs, which connect through Neutrik etherCON to any configuration of the VIP panels. It allows for media playback, configuration, addressing and remote power control of the panels. It is scalable to link up to 4 individual units in one system (5,242,880 LEDs total capacity). The Chauvet VIP Driver is needed for panel calibration and video conversion to CHAUVET® MVP™ and PVP™ video panels as well. The Chauvet LED Studio software is connected directly to the VIP™ Driver through USB for patching and panel setup. The VIP Driver allows either DVI or HDMI input 2 Neutrik® etherCON® outputs (655,360 LEDs capacity each). If you are looking for a VIP Driver that is a LINSN Protocol, Switcher/Scaler and driver in one, check out the Chauvet VIP Drive 43s.

Chauvet VIP Driver Key Features:

  • Needed for panel calibration and video conversion to CHAUVET ® MVP™ and PVP™ video panels
  • CHAUVET® LED Studio software connects straight to the VIP™ Driver through USB for patching and panel setup
  • Works with either DVI or HDMI input 2 Neutrik® etherCON® outputs (655,360 LEDs capacity each)
  • Capable of up to 1,310,720 LEDs and is scalable to link up to 4 units in a one system (5,242,880 LEDs total capacity)
  • Needed to convert video signal in PVP systems

Chauvet VIP Driver

  • Control Protocol: LINSN
  • Data Connectors: Neutrik® etherCON® (2), USB
  • Video Input: DVI-I or HDMI (requires progressive scan, not interlaced)
  • Linking Connection: RS-232 (9-pin)
  • Rackmount: 1U
  • Required Software: CHAUVET® LED Studio (included) and Windows®7
  • Software Connection: USB
  • IP Rating: IP20, dry location
  • Cable Length: 5 ft (1.5 m)
  • Power Connection: Edison plug to IEC
  • Power Input: IEC

Call 1-877-477-6432 for any technical questions or if you need SPECIAL PRICING regarding this product