Clear-Com CZ-BS410 Base Station side view
Clear-Com CZ-BS410 Base Station back view
Clear-Com CZ-BS410 Base Station back view w/ out antennas
Clear-Com CZ-BS410 Base Station front view

Clear-Com CZ-BS410 Base Station

2 Channel Base Station w/ 2 Antennas

Product Highlights

  • 2 Channels
  • 2.4 GHz frequency range
  • 7KHz wide band audio
  • Two wire and Four wire bridging on the same system
  • Two wire auto nulling
  • Lost packet concealment
  • Supportive of up to 15 beltpacks and/or wireless headsets

Sale Price $4,387.50
Retail Price $4,875.00
You save $487.50

ADD TO CART

 Guaranteed Lowest Price
100% Satisfaction Guarantee
Free Freight on most products
Lifetime Technical Support
Easy Financing
Our Low Price Guarantee

Clear-Com CZ-BS410 Base Station

The BS410 is a 2 channel digital wireless solution functioning in the 2.4GHz frequency band with 7KHz wideband audio, which provides an overall better experience in regards to performance, range and audio. The BS410 is the dedicated base station for the DX410 wireless system, used in conjunction with the wireless BP410 Beltpacks. A single DX410 base station supports up to fifteen registered BP410 beltpacks and/or WH410 all in one wireless headsets. Two wire auto nulling allows for fast and precise integration with Clear-Com and RTS wired partyline systems. The BS410 is a 1RU 2-channel base station with local headset, 2 and 4 wire audio connections, auxiliary in/out, and assignable relays. 2-wire connections can be assigned to RTS or Clear-Com and have auto nulling. The built in 2.4GHz transceiver transfers RF through two dipole antennas with inverse TNC connectors. The BS410 gives the option for combining 2 wire and 4 wire audio together on A or B channels.

Clear-Com CZ-BS410 Base Station Key Features:

  • 2 Channels
  • 2.4 GHz frequency range
  • 7KHz wide band audio
  • Two wire and Four wire bridging on the same system
  • Two wire auto nulling
  • Lost packet concealment
  • Supportive of up to 15 beltpacks and/or wireless headsets

CZ-BS410 Base Station Audio Bridging
The BS410 allows the option for combining 2-wire and 4-wire audio together on A or B channels. When daisy-chaining multiple bases together, users are able to bridge a 4-wire, allowing the use of 4-wire out to send the audio to a mixer, matrix or other audio source.

CZ-BS410 Base Station Clear Audio
The DX410 system features 7KHz wideband audio. The high quality audio expands audio range and increases intelligibility in high RF environments so even soft whispers can be heard clearly.

CZ-BS410 Base Station 2-Wire Auto-Nulling
Auto-nulling provides echo cancellation on unbalanced 2-wire intercom systems for fast and accurate integration with RTS and Clear-Com wired partyline systems.


Clear-Com CZ-BS410 Base Station

Audio

  • Channels: 2 audio channels
  • Capacity: Up to 15 BP410 and/or WH410 per base station
  • Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex.
  • Dual-channel = 3 in simultaneous full-duplex.
  • Radio Frequency Range: 2400 – 2483.5 MHz
  • Audio Frequency: 200 Hz – 7KHz
  • 4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
  • 2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
  • Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600 Ohms balanced, level adjustable
  • Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
  • Headset Connector: 4-pin mini-DIN, Electret microphone
  • Headset Output: 200mW into 32 Ohms
  • Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
  • System Distortion: <2%
  • Communication Security: 64-bit encryption, dual-slot diversity

Transmitter

  • Type: Frequency Hopping, Spread Spectrum (FHSS)
  • Transmit Power: 100mW burst
  • Modulation Type: Gaussian filtered FSK, TDMA
  • Frequency Stability: 13 ppm
  • Hamonics/Spurious: Exceeds FCC and ETSI specifications over temperature

Receiver

  • Type: Frequency Hopping, Spread Spectrum (FHSS)
  • RF Sensitivity: <-90dBm w 10-3 BER
  • Frequency Stability: 13 ppm
  • Distortion:<2%
  • Power Requirements: 100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDC
  • Environmental: Temperature: +32°F - +122°F (0°C - +50°C)
  • Dimensions: 1.75 x 19.0 x 17.13 in (44 x 483 x 435 mm) (HxWxD)
  • Weight: 9 lbs (4.1 kg

Call 1-877-477-6432 for any technical questions or if you need SPECIAL PRICING regarding this product