RedNet HD32R Multi Channel Dante Interface front view
RedNet HD32R Multi Channel Dante Interface back view
RedNet HD32R Multi Channel Dante Interface close up
RedNet HD32R Multi Channel Dante Interface side view

Focusrite RedNet HD32R Multi Channel Dante Interface

32-Channel Bridge between Dante Networks and Pro Tools|HD

Product Highlights

  • Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX
  • Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
  • Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
  • Permits multiple workstations to access the same interface hardware and I/O
  • Additional Avid/Digidesign interfaces may be connected to expansion ports
  • Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R

Sale Price $1,599.99
Retail Price $1,899.99
You save $300.00

ADD TO CART

 Guaranteed Lowest Price
100% Satisfaction Guarantee
Free Freight on most products
Lifetime Technical Support
Easy Financing
Our Low Price Guarantee

Focusrite RedNet HD32R Multi Channel Dante Interface

About RedNet:

Rednet is Focusrite's leading range of modular Ethernet-networked audio interfaces that harness the power of Audinate's trusty Dante digital audio networking system. This system brings top-quality studio sound to any modern audio application. At its core, RedNet is very versatile almost zero latency audio distribution system that can be utilized for many purposes. These purposes include expanding I/O channel count, interface digital parts, and/or connect between Pro Tools|HD or MADI and the Dante audio network. Overall, the RedNet audio networking system functions with a trusted and time-tested, widely-compatible technology. It can also be linked with a large selection of other comapanies' Dante- compatible gear. Technically speaking, the RedNet interfaces perfroms amazingly. Modern, sleek and attractive designs add to their value.

RedNet HD32R Multi Channel Overview:

RedNet HD32R is a 1U, 19in rack-mount Dante interface that gives Pro Tools|HD users straight-forward access to the entire range of benefits of the Dante digital audio networking system. These benefits include uniquely flexible network topology, in addition to to-quality audio interfaces. The Pro Tools system is linked to the HD32R via standard Mini DigiLink ports. HD32R acts as a 64-channel (32 in/32 out) digital break in/out box, operating in the same way as a standard interface, and supporting a wide array of Pro Tools|HDX and HD cards. Up to six HD32R modules can be conected with a Pro Tools|HDX system and three with Pro Tools|HD, enabling the maximum channel count for either. The HD32R features a tough, gritty exterior and high quality internal build, with Ethernet and power supply redundancy. It also offers a compact 1U rack-mount form factor for a full 32 channels of I/O.

RedNet HD32R Key Features:

  • Allows Dante Ethernet-based audio networking products to interoperate fully with Pro Tools|HD & Pro Tools|HDX
  • Ethernet and power supply redundancy with auto switchover in case of failure and locking connectors
  • Provides the vital link to create an extensive high-quality audio network based on standard Cat 5e or Cat 6 wiring, bringing the latest advances in digital audio networking to Pro Tools|HD
  • Cost-effectively increase audio I/O quality and flexibility with RedNet interfaces
  • Permits multiple workstations to access the same interface hardware and I/O
  • No changes to Pro Tools workflow required – simple, logical assignment of RedNet I/O to Pro Tools|HD inputs and outputs
  • Up to 32 I/O with Pro Tools|HD over single DigiLink connection per RedNet HD32R
  • Additional Avid/Digidesign interfaces may be connected to expansion ports
  • Upgrade to RedNet interfaces while remaining fully compatible with TDM- or AAX-DSP-based plugins and saved sessions

Focusrite RedNet HD32R Multi Channel Dante Interface

Digital Performance:

  • Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
  • Clock Sources: Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master.
  • External Word Clock Range: Nominal sample rate ±7.5%

Rear Panel Connectivity:

Pro Tools HD:

  • Primary Port: 1 x Mini DigiLink
  • Expansion Port: 1 x Mini DigiLink

Loop Sync:

  • Word Clock Input: 1 x BNC 75Ω port
  • Word Clock Output: 1 x BNC 75Ω port

Word Clock:

  • Word Clock Input: 1 x BNC 75Ω port (switchable termination)
  • Word Clock Output: 1 x BNC 75Ω port

PSU & Network Connections:

  • PSU: 2 x IEC Inputs with retaining clips.
  • Network: 2 x etherCON connectors, also compatible with standard RJ45 connectors.

Front Panel Indicators:

  • Primary PSU (A): Green LED. Illuminates when an AC input is applied and all DC outputs are present.
  • Primary PSU (B): Green LED. Illuminates when an AC input is applied and all DC outputs are present.
  • Primary Network: Green LED. Indicates that a network connection is present on primary port when in redundant mode. When in Switched mode, a valid network connection at either Primary or Secondary network port will cause this LED to illuminate.
  • Secondary Network: Green LED. Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode.
  • Network Locked: Green LED. When unit is network slave, shows valid network lock. When unit is network master, shows lock to indicated clock source. Flashing indicates external clock is selected but not connected.
  • Sample Rate: Orange LED for each: 44.1 kHz, 48 kHz, x2, x4.
  • Pull Up/Down: Orange LED. Indicates unit is set to operate on a Dante pull up/down domain.
  • Signal Indicators: 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS.
  • Clock Source: Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master.

Network Modes:

  • Redundant: Allows unit to connect two independent networks.
  • Switched: Connects both ports to integrated network switch allowing daisy-chaining of device.

Dimensions:

  • Height: 44.5mm/ 1.75"
  • Width: 482.6mm/ 19"
  • Depth: 263mm/ 10.35"

Weight:

  • Weight: 3.9kg

Power:

  • PSU: 2 x Internal, 100-240V, 50/60Hz, consumption 30VA.

Call 1-877-477-6432 for any technical questions or if you need SPECIAL PRICING regarding this product